User`s manual

VIVOTEK

User's Manual - 193

integer> accept at least.

(Used by forcechk)

Return Code Description

400 Bad Request Request is rejected because some parameter values are illegal.

415 Unsupported Media Type Returned, if forcechk appears, when minsft is not achievable or

the timeshift feature of the target stream is not enabled.

8.24 Open Anystream (capability.nanystream > 0)

Note: This request requires Viewer access privileges.

Syntax:

For HTTP push server (MJPEG):

http://<servername>/videoany.mjpg?codectype=mjpeg[&resolution=<value>&mjpeg_quant=<value

>&mjpeg_qvalue=<value>&mjpeg_maxframe=<value>]

For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.

rtsp://<servername>/liveany.sdp?codectype=mpeg4[&resolution=<value>&mpeg4_intraperiod=<val

ue>&mpeg4_ratecontrolmode=<value>&mpeg4_quant=<value>&mpeg4_qvalue=<value>&mpeg4

_bitrate=<value>&mpeg4_maxframe=<value>]

For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.

rtsp://<servername>/liveany.sdp?codectype=h264[&resolution=<value>&h264_intraperiod=<value

>& h264_ratecontrolmode=<value>& h264_quant=<value>& h264_qvalue=<value>&

h264_bitrate=<value>& h264_maxframe=<value>]

PARAMETER VALUE DEFAULT DESCRIPTION

codectype mjpeg, mpeg4, h264

N/A Set codec type for Anystream.

solution capability_videoin_resolution <product

dependent>

Video resolution in pixels.

mjpeg_quant 0, 1~5

99, 1~5

3 Quality of JPEG video.

0,99 is the customized manual

input setting.

1 = worst quality, 5 = best

quality.