User manual

- 61 -
www.vivotek.com
Application configuration URL
URL: /setup/app.cgi
NAME VALUE DESCRIPTION
emode <not required> event mode application
smode <not required> sequential mode application
mail upload snapshots by email smethod
ftp upload snapshots by FTP
suffix <not required> FTP file with date and time suffix
delay <integer> seconds delay to detect next event
inter <integer> seconds delay to capture post-event
dihigh < not required > set DI high as trigger condition
dilow < not required > set DI low as trigger condition
dirise < not required > set DI rising as trigger condition
difall < not required > set DI falling as trigger condition
motion1 < not required > set motion window1 as trigger
condition
motion2 < not required > set motion window2 as trigger
condition
motion3 < not required > set motion window3 as trigger
condition
ioalarm < not required > trigger DO when DI condition
matched
mdalarm < not required > trigger DO when motion detected
ioupload < not required > upload snapshot when DI condition
matched
mdupload < not required > upload snapshot when motion
detected
sinter <integer> seconds interval for sequential mode
sbegin <hh:mm:ss> time to start sequential mode
send <hh:mm:ss> time to stop sequential mode