User Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Media profiles
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Storage
- Storage > SD card management
- Storage > NAS management
- Storage > Content management
- Appendix
VIVOTEK
370 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
240
NAME VALUE SECURITY
(get/set)
DESCRIPTION
s<0~(m-2)>_region_t
ilt
-90~90 1/4 Tilt home angle of regional view (for
1R mode)
Tilt range of ceiling/floor mount is
[0~90].
Tilt range of wall mount is [-90~90].
s<0~(m-2)>_region_
zoom
100~300 1/4 Zoom home ratio of regional view (for
1R mode)
s<0~(m-2)>_region_r
<0~(i-1)>_pan
-90~359 1/4 Pan home angle of regional view (for
4R mode, i is the view index and range
from 0 to 3)
Pan range of ceiling/floor mount is
[0~359].
Pan range of wall mount is [-90~90].
s<0~(m-2)>_region_r
<0~(i-1)>_tilt
-90~90 1/4 Tilt home angle of regional view (for
4R mode, i is the view index and range
from 0 to 3)
Tilt range of ceiling/floor mount is
[0~90].
Tilt range of wall mount is
[-90~90].
s<0~(m-2)>_region_r
<0~(i-1)>_zoom
100~300 1/4 Zoom home ratio of regional view (for
4R mode, i is the view index and range
from 0 to 3)
7.47 PIR Behavior Define
Group: pir (capability_npir > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 1/1 Enable/disable PIR
7.48 Auto Tracking Setting
Group: autotrack_c<0~(n-1)> (capability_image_c<0~(n-1)>_autotrack_support > 0)
n denotes the value of "capability_nvideoin"