User Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Media profiles
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Storage
- Storage > SD card management
- Storage > NAS management
- Storage > Content management
- Appendix
VIVOTEK
User's Manual - 347
© 2020 VIVOTEK INC. All Right Reserved
216
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
adaptive_enable
<boolean> 6/6 Indicate whether the adaptive
recording is enabled
adaptive_preevent
0~9 6/6 Indicate when is the adaptive recording
started before the event trigger point
(seconds)
adaptive_postevent
0~10 6/6 Indicate when is the adaptive recording
stopped after the event trigger point
(seconds)
recordingjob_Sourc
eToken_Token
string[64] 6/6 Indicate the source for media profile.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0314b.
7.32 HTTPS
Group: https (capability_protocol_https > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 To enable or disable secure HTTP.
policy <Boolean> 6/6 If the value is 1, it will force HTTP
connection redirect to HTTPS
connection
method auto,
manual,
install
6/6 auto =>Create self-signed certificate
automatically.
manual =>Create self-signed certificate
manually.
install =>Create certificate request and
install.
status -3 ~ 1 6/6 Specify the https status.
-3= Certificate not installed
-2 = Invalid public key
-1 = Waiting for certificate
0= Not installed
1 = Active
countryname string[2] 6/6 Country name in the certificate
information.
© 2020 VIVOTEK INC. All Right Reserved
217
NAME VALUE SECURITY
(get/set)
DESCRIPTION
stateorprovincen
ame
string[128] 6/6 State or province name in the
certificate information.
localityname string[128] 6/6 The locality name in thecertificate
information.
organizationname
string[64]
VIVOTEK Inc.
6/6 Organization name in the certificate
information.
unit string[64]
VIVOTEK Inc.
6/6 Organizational unit name in
thecertificate information.
commonname string[64]
www.vivotek.com
6/6 Common name in the certificate
information.
validdays 0 ~ 825 6/6 Valid period for the certification.
7.33 Storage Management Setting
Group: disk_i<0~(n-1)> n denotes the value of "capability_storage_management_ndevice"
(capability_storage_management_ndevice > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
cyclic_enabled <boolean> 6/6 Enable cyclic storage method.
cyclic_reserve 10 ~ 99 6/6 The reserved percentage of this disk.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
type sd, nas
<product
dependent>
6/7 The storage device type.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.