User Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Media profiles
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Storage
- Storage > SD card management
- Storage > NAS management
- Storage > Content management
- Appendix
VIVOTEK
User's Manual - 339
© 2020 VIVOTEK INC. All Right Reserved
208
7.29 Server Setting for Event Action
Group: server_i<0~4>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 Identification of this entry
type email,
ftp,
http,
ns,
sftp
6/6 Indicate the server type:
“email” = email server
“ftp” = FTP server
“http” = HTTP server
“ns” = network storage
“sftp” = secure FTP
* “sftp” is only available when bit 1 of
“capability_protocol_ftp_client” is 1.
http_url string[128] 6/6 URL of the HTTP server to upload.
http_username string[64] 6/6 Username to log in to the server.
http_passwd string[64] 7/6 Password of the user.
ftp_address string[128] 6/6 FTP server address.
ftp_username string[64] 6/6 Username to log in to the server.
ftp_passwd string[64] 7/6 Password of the user.
ftp_port 0~65535 6/6 Port to connect to the server.
ftp_location string[128] 6/6 Location to upload or store the media.
ftp_passive <boolean> 6/6 Enable or disable passive mode.
0 = disable passive mode
1 = enable passive mode
email_address string[128] 6/6 Email server address.
email_sslmode <boolean> 6/6 Enable support SSL.
email_port 0~65535 6/6 Port to connect to the server.
email_username string[64] 6/6 Username to log in to the server.
email_passwd string[64] 7/6 Password of the user.
email_senderemail string[128] 6/6 Email address of the sender.
email_recipientemail string[640] 6/6 Email address of the recipient.
© 2020 VIVOTEK INC. All Right Reserved
209
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
ns_location string[128] 6/6 Location to upload or store the media.
* For httpversion is equal or greater than
0312a:
The media storage path format is “\<mac
address>\date\hour
”. (Only available when
“nas” is included in
“capability_storage_management_device”)
* For httpversion smaller than 0312a:
The media storage format is “\date\hour”.
* Note: “\date\hour” format is
“\YYYYMMDD\hh”.
ns_username string[64] 6/6 Username to log in to the server.
ns_passwd string[64] 7/6 Password of the user.
ns_workgroup string[64] 6/6 Workgroup for network storage.
7.29.1. Server Setting for Event Action of sftp
Group: server_i<0~4>_sftp
* Only available when bit 1 of “capability_protocol_ftp_client” is 1.
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
address string[128] 6/6 Server address
loginmode passwd,
publickey
6/6 authentication method:
”passwd” = password authentication.
You have to setup sftp_passwd for this
login mode to work.
”publickey” = Public key authentication
is more secure than password
authentication.
Please see sftpclient.cgi for more detail
settings.
username string[64] 6/6 Username
passwd string[64] 7/6 User password
port 0~65535 6/6 Server port
location string[128] 6/6 Login path on server