User Manual

VIVOTEK
User's Manual - 333
© 2020 VIVOTEK INC. All Right Reserved
202
NAME VALUE SECURITY
(get/set)
DESCRIPTION
"capability_image_c<0~(n-1)>_lens_al
ignment" is 1.
lens_ldc_support <boolean> 0/7 Indicate whether to support lens
distortion correction function.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0309d.
palette_support <boolean> 0/7 Indicate support color palettes or not.
Thermal cameras provide a choice of
color palettes on the camera, that
help quickly distinguish thermal
variations and patterns in an image.
The color tones correspond to the
apparent surface temperatures of the
target.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0310a.
palette_mode A list of palette
options
0/7 Palette options used in thermal
surveillance.
*Only available when
"capability_image_c<0~(n-1)>_palette
_support"=1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0310a.
7.27.10 Capability for Peripheral Device
Group: capability_peripheral_c<0~(n-1)> n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
devicecontrol <boolean> 0/7 Indicate whether to support the
peripheral device control.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0305c.
© 2020 VIVOTEK INC. All Right Reserved
203
7.28 Event Setting
Group: event_i<0~(n-1)> n denotes the value of "capability_nevent"
(capability_nevent > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 Identification of this entry.
enable 0, 1 6/6 Enable or disable this event.
priority 0, 1, 2 6/6 Indicate the priority of this event:
“0”= low priority
“1”= normal priority
“2”= high priority
delay 1~999 6/6 Delay in seconds before detecting the
next event.
trigger boot,
di,
pir,
motion,
seq,
recnotify,
tampering,
vi,
volalarm,
visignal,
vadp,
smartsd
<product
dependent>
6/6 Indicate the trigger condition:
"boot" = System boot.
"di"= Digital input.
"pir"= PIR detection.
"motion" = Video motion detection.
"seq" = Periodic condition.
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger).
"volalarm"= Audio detection.
"smartsd"= Lifetime detection of SD card.
"shockalarm" = Shock detection.
"virestore" = Video input signal restore.
"vadp" = VADP trigger.
* "smartsd" is only valid when smart SD
card is inserted
triggerstatus string[40] 6/6 The status for event trigger