User Manual
Table Of Contents
- Software Installation on page 10
- Revision History
- Overview
- Network Deployment
- Accessing the Network Camera
- Main Page
- Client Settings
- Configuration
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings 
- Applications > Motion detection
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings 
- Appendix
VIVOTEK
User's Manual - 167
42
can be set separately as
follows:
Bit 0 => Support tilt.
Bit 1 => Support tilt in
UI.
Bit 2 => External or
built-in tilt function;
0(built-in), 1(external).
lens_zoom 0, <positive integer> 0 0/7 A 32-bit integer, each bit
can be set separately as
follows:
Bit 0 => Support zoom
Bit 1 => Support zoom in
UI
Bit 2 => External or
built-in zoom function;
0(built-in), 1(external).
lens_focus 0, <positive integer> 0 0/7 A 32-bit integer, each bit
can be set separately as
follows:
Bit 0 => Support focus.
Bit 1 => Support focus in
UI.
Bit 2 => External or
built-in focus function;
0(built-in), 1(external).
Bit 3 => Support auto
focus in UI.
lens_iris 0, <positive integer> 0 0/7 A 32-bit integer, each bit
can be set separately as
follows:
Bit 0 => Support iris.
Bit 1 => Support iris in
UI.
Bit 2 => External or
build-in iris function;
0(build-in), 1(external).
Bit 3 => Support auto iris
in UI.