User Manual
Table Of Contents
- Software Installation on page 10
- Revision History
- Overview
- Network Deployment
- Accessing the Network Camera
- Main Page
- Client Settings
- Configuration
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings 
- Applications > Motion detection
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings 
- Appendix
VIVOTEK
User's Manual - 165
40
ndo 0,
<positive integer>
0 0/7 Number of digital outputs.
naudioin 0,
<positive integer>
1 0/7 Number of audio inputs.
naudioout 0,
<positive integer>
0 0/7 Number of audio outputs.
nvideoin <positive integer> 1 0/7 Number of video inputs.
nvideoinprofile <positive integer> 1 0/7 Number of video input
profiles.
nmediastream <positive integer> 2 0/7 Number of media stream
per channels.
nvideosetting <positive integer> 2 0/7 Number of video settings
per channel.
naudiosetting <positive integer> 1 0/7 Number of audio settings
per channel.
nuart 0,
<positive integer>
0 0/7 Number of UART
interfaces.
nmotionprofile 0, <positive integer> 1 0/7 Number of motion
profiles.
ptzenabled 0, <positive integer> 189 0/7 An 32-bit integer, each bit
can be set separately as
follows:
Bit 0 => Support camera
control function;
0(not support), 1(support)
Bit 1 => Built-in or
external camera;
0(external), 1(built-in)
Bit 2 => Support pan
operation, 0(not support),
1(support)
Bit 3 => Support tilt
operation; 0(not support),
1(support)
Bit 4 => Support zoom
operation;
0(not support), 1(support)
Bit 5 => Support focus
operation;