User Manual
Table Of Contents
- Software Installation on page 10
- Revision History
- Overview
- Network Deployment
- Accessing the Network Camera
- Main Page
- Client Settings
- Configuration
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings 
- Applications > Motion detection
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings 
- Appendix
VIVOTEK
152 - User's Manual
27
Enable flickless mode will
limit the parameters:
minexposure and
maxexposure between
5~120.
minexposure 5,15,25,30,50,6
0,100,120,240,
250,480,500,10
00,2000,4000,8
000,16000,320
00
32000 4/4 Minimum exposure time.
maxexposure 5,15,25,30,50,6
0,100,120,240,
250,480,500,10
00,2000,4000,8
000,16000,320
00
30 4/4 Maximum exposure time.
enableblc 0~1 0 4/4 Enable backlight
compensation
s<0~(m-1)>_codectype mjpeg, h264 h264 1/4 Video codec type.
svc is only supported with
stream 0.
s<0~(m-1)>_resolution "176~1280"x"1
44~1024"
1280x1024 1/4 Video resolution in pixels.
s<0~(m-1)>_mjpeg_ratecontr
olmode
cbr, vbr cbr 4/4 cbr, constant bitrate
vbr, fix quality
s<0~(m-1)>_ mjpeg _quant 1~5,99,100 3 4/4 Quality of video when
choosing vbr in
“ratecontrolmode”.
99,100 is the customized
manual input setting.
1 = worst quality, 5 = best
quality.
s<0~(m-1)>_ mjpeg
_qvalue
1~31 7 4/4 Manual video quality
level input.
(s<0~(m-1)>_mjpeg_quan
t = 99)
s<0~(m-1)>_ mjpeg
_qpercent
1~100 29 4/4 Set quality by percentage.
1: Worst quality