User Manual
Table Of Contents
- Software Installation on page 10
- Revision History
- Overview
- Network Deployment
- Accessing the Network Camera
- Main Page
- Client Settings
- Configuration
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings 
- Applications > Motion detection
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings 
- Appendix
VIVOTEK
150 - User's Manual
25
concurrent streaming
connection(s).
type 0, 1
1
6/6 Ipfilter policy :
0 => allow
1 => deny
ipv4list_i<0~9> Single address:
<ip address>
Network
address: <ip
address /
network mask>
Range
address:<start ip
address - end ip
address>
<blank>
6/6 IPv4 address list.
ipv6list_i<0~9> String[44]
<blank>
6/6 IPv6 address list.
7.8 video input
Group: videoin
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
cmosfreq 50, 60 60 4/4 CMOS frequency.
(capability.videoin.type=2)
whitebalance auto,
manual,
auto 4/4 “auto” indicates auto white
balance.
“manual” indicates keep current
value.
exposurelevel 0~12 6 4/4 Exposure level
irismode fixed fixed 4/4 Video Iris or DC Iris.
enableblc <boolean> 0 4/4 Enable backlight compensation.
7.8.1 video input setting per channel
Group: videoin_c<0~(n-1)> for n channel products, and m is stream number
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
whitebalance auto, auto 4/4 “auto” indicates auto white