Installation Guide

6
Installation
V
Installation Suggestions
IV
1.
Prepare power wires, a ground wire, and a CAT5e Ethernet cable. Pass them through
the M16 waterproof connectors and its waterproof components.
• When installing a housing that comes with an IR illuminator:
Please avoid eye exposure or apply appropriate protection, such as wearing a pair of Infrared
protection glasses, when working with the product. Always use camera live view to oberve IR
lighting effects.
WARNING:
Ethernet cable Ø4 ~ 6.5mm
Power wires & DI/DO wires,
a combo cable from IR illuminator
(if applied)
Note that some cables are connected when shipped. You do not need to connect heater,
blower, and the front IR powere wires.