3GPP/ISMA PT7135 Pan/Tilt Network Camera IP Sur veillance
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Product name: Network Camera with Pan/Tilt (PT7135) Release Date: 2009/03/25 Manual Revision: 2.4 Web site: www.VIVOTEK.com Email: technical@VIVOTEK.com sales@VIVOTEK.com Made in Taiwan. 2 - User's Manual ©Copyright 2000-2009.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Before You Use This Product The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a high-performance web-ready camera but also can be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Table of Contents Before You Use This Product.................................................................. 2 Package Contents ................................................................................ 5 Installation ......................................................................................... 5 Hardware installation...................................................................... 5 Software Installation .........
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Email .................................................................................... 39 FTP ...................................................................................... 39 Motion detection .......................................................................... 41 Application settings ...................................................................... 42 Snapshot..........................................................
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Package Contents PT7135 Quick installation guide Power adapter Warranty card Mounting Kit & Pads Software CD 6 - User's Manual
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. Hardware installation Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Software Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. At the end of the hardware installation, the Administrator must place the product software CD into the CD-ROM drive of the PC running in MS Windows.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Upon Installation Wizard’s start up, a searching box will pop up. This program searches for VIVOTEK’s product on the same LAN: After searching, VIVOTEK Video Servers or Network Cameras will be located by the Installation Wizard. There may be several entries shown Administrator in may the window. The differentiate the Network Cameras with the serial number.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions The IP addresses shown in the "Current IP Address" field reflect those on the local network. They may be from the DHCP server. If there is no DHCP server, the camera will try to find a free IP address (this takes from 15 second to 3 minutes, depending on the LAN status). The method of finding IP address is seeking from 192.168.0.99, to 192.168.0.254.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions For more detailed usage of the Installation Wizard, please refer to the user’s manual of the Installation Wizard included in the product CDROM to find the location of the Network Camera. There may be many Network Cameras in the local network. Users can differentiate the Network Cameras with the serial number. The serial number is printed on the labels on the carton and the back of the Network Camera body.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Initial Access to the Network Camera Check Network Settings The Network Camera can be connected either before or immediately after software installation onto the Local Area Network. The Administrator should complete the network settings on the configuration page, including the correct subnet mask and IP address of gateway and DNS. Ask your network administrator or Internet service provider for the detail information.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions How to Use Authentication After opening the Web browser and typing in the URL of the Network Camera, a dialogue window pops up to request a username and password. Upon successful authentication, the following figure is displayed. The foreground is the login window and the background shows the message if authentication fails. The user may check the option box to save the password for future convenience.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Installing plug-in For the initial access to the Network Camera in Windows, the web browser may prompt for permission to install a new plug-in for the Network Camera. Permission request depends on the Internet security settings of the user’s PC or notebook. If the highest security level is set, the computer may prohibit any installation and execution attempt.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Primary user’s capability Main Screen with Camera View The main page layout has three parts: Configuration functions: The camera can be configured using these user interfaces. Camera View: What the camera sees. Pan/Tilt control buttons: These buttons provide a command interface to control the aim of the camera. Click on the configuration link to the left of the image window to enter the configuration page.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions The Configuration: “Snapshot” The button provides users a fast way to capture a single image of the video from the Network Camera. “Client Settings” Clicking on this button links you to the client setting pages, please check the following session for more details. “Configuration” Only the Administrator can access camera configurations.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions View capabilities This feature allows users to open a digital zoom control window to specify the zoom factor for specified area in the camera view. Users can also move the white frame to select the area of the video that she/he wants to view. “Disable digital zoom” The checkbox selection allows users to disable/enable the digital zoom function.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions The pan/tilt control buttons: The direction buttons are for Left, Right, Up, Down, and Home functions. The Home button centers the camera. “Go to” Once the Administrator has determined the preset positions; the User can aim the camera using this control. “Pan speed” This button sets the moving range of the “Left” and “Right” commands. “Tilt speed” This button sets the moving range of the “Up” and “Down” commands.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Client settings At the initial access to the “Connection type” page in Windows, the web browser will ask for a new plug-in installation, the plug-in being the Network Camera. This plug-in has been registered for certification and can be used to change the parameters at the client’s site. The user may click on to install the plug-in.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions The UDP protocol allows for more real-time audio and video streams. However, some packets may be lost due to network burst traffic and images may be obscured. The TCP protocol allows for less packet loss and produces a more accurate video display. The downside with this protocol is that the real-time effect is worse than that with the UDP protocol.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Administrator’s capability Fine-tuning for Best Performance Best performance generally equates to the fastest image refresh rate with the best video quality, and at the lowest network bandwidth as possible. The three factors, “Maximum frame rate”, “Constant bit rate”, and “Fix quality” on the Audio and Video Configuration page, are correlative to allow for achieving the best performance possible.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions For Best Real-time Video Images To achieve good real-time visual effect, the network bandwidth should be large enough to allow a transmission rate of greater than 20 image frames per second. If the broadband network is over 1 Mbps, set the “Fix bit rate” to 1000Kbps or 1200Kbps. The maximum frame rate is 30.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Opening accounts for new users 1 2 3 Protect Network Camera by passwords The Network Camera is shipped without any password by default. That means everyone can access the Network Camera including the configuration as long as the IP address is known. It is necessary to assign a password if the Network Camera is 1 to enable protection. intended to be accessed by others.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Build a security application The Administrator can use the built-in motion detection to monitor any movement to perform many useful security applications. To upload the snapshots, users can choose either email or FTP according to user’s needs. Both e-mail and FTP use the network settings on the Email and FTP page. Refer to the definition section for detail configuration. 1. Click on “Configuration” on homepage, 2.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Software revision upgrade Customers can obtain the up-to-date software from the web site of VIVOTEK. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system, follow the procedures below. 1. Download the firmware file named “xxx.pkg” from the appropriate product folder. 2.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Definitions in Configuration Only the Administrator can access system configuration. Each category in the left column will be explained in the following pages. The bold texts are the specific phrases on the Option pages. The Administrator may type the URL below the figure to directly enter the frame page of configuration. If the Administrator also wants to set certain options through the URL, read the reference appendix for details.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions System parameters "Host name" The text displays the title at the top of the main page. “Turn off the LED indicator” Check this option to shut off the LED on the rear. It can prevent the camera’s operation being noticed. "Daylight Saving Time" Click on this to reserve the daylight saving time of the Network Camera. "Time zone" Adjust the time with that of the time-servers for local settings.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Security settings “Root password” Change the Administrator’s password by typing in the new password identically in both text boxes. The typed entries will be displayed as asterisks for security purposes. After pressing , the web browser will ask the Administrator for the new password for access. “Add user” Type the new user's name and password and press to insert the new entry. The new user will be displayed in the user name list.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Network settings Any changes made on this page will restart the system in order to validate the changes. Make sure every field is entered correctly before clicking on . Network type “LAN” & “PPPoE” The default type is LAN. Select PPPoE if using ADSL "Get IP address automatically" & “Use fixed IP address” The default status is “Get IP address automatically”.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions HTTP “Http port” This can be other than the default Port 80. Once the port is changed, the users must be notified the change for the connection to be successful. For instance, when the Administrator changes the HTTP port of the Network Camera whose IP address is 192.168.0.100 from 80 to 8080, the users must type in the web browser “http://192.168.0.100:8080” instead of “http://192.168.0.100”.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions http:///setup/network.html is the domain name or original IP address of the Network Camera.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions DDNS “Enable DDNS” This option turns on the DDNS function. “Provider” The provider list contains four hosts that provide DDNS services. Please connect to the service provider’s website to make sure the service charges. “Host Name” If the User wants to use DDNS service, this field must be filled. Please input the hostname that is registered in the DDNS server.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Access List The access list is to control the access permission of clients by checking the client IP address. There are two lists for permission control: Allow List and Deny List. Only those clients whose IP address is in the Allow List and not in the Deny List can connect to the Video Server or Network Camera for receiving the audio/video streaming. Both Allow List and Deny List consist of a list of IP ranges.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Audio and Video General “Configure for computer viewing” To make quick setting for computer viewing “Configure for mobile viewing” To make quick setting for cell phone viewing Video Settings “Video title” The text string can be displayed on video “Color” Select either for color or monochrome video display. “Frame Size” There are four options for video sizes. “160x120”, “176x144”, “320x240”, “640x480”.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Video orientation “Flip” Vertically rotate the video. “Mirror” Horizontally rotate the video. Check options both if the Network Camera is installed upside down. “White balance” Adjust the value for best color temperature.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Image Settings Click on this button to pop up another window to tune “Brightness”, “Contrast”, “Hue” and “Saturation” for video compensation. Each field has eleven levels ranged from -5 to +5. “Brightness” “Contrast” value 0 tuning. and fields the indicates auto The user press fine-tune In may to the image. When the image is O.K., press to set the image settings.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Camera Control Camera control area Preset function area On the Camera Control page, there are two main function control areas: Camera control area The pan and tilt functions can be controlled with these buttons. The “Left” button aims the camera to the left; the “Right”, “Up”, and “Down” buttons aim the camera accordingly. The “Home” button aims the camera to the center.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Preset function area ”Current position”, If the User wants to save the current view as a preset location, enter a name for each of the current video view at “current position” and click on the “Add” button. The camera allows for 20 preset locations. ”Preset position” This keeps a list for preset positions. Clicking on the “Delete” button will remove the current selected position from the preset list.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Email & FTP Email When the SMTP server support SMTP authentication, users need to give the valid user name and password to send email via the server. “Sender email address” Input the email address of the sender. There are two external mail server can be configured, primary and secondary email server, The network camera will use primary server as default , and use secondary server when primary server is unreachable.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions slash symbol before the path without virtual path mapping. Refer to the instructions for the external FTP server for details. The folder privilege must be open for upload. http:///setup/mailftp.html is the domain name or original IP address of the Network Camera.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Motion detection “Enable motion detection” Check this option to turn on motion detection. Click on this button to add a new window. At most three windows can exist simultaneously. Use the mouse to click, hold, and drag the window frame to resize or the title bar to move. Click on the ‘x’ at the upper right-hand corner of the window to delete the window. Remember to save in order to validate the changes.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Application settings The server provides two kinds of applications, snapshot and videoclip. There are two independent snapshot items to set, and they are named as Snapshot #1 and Snapshot #2. The status, schedule, trigger condition, and action of three applications are summaried in the application page. The user can click on Snapshot #1, Snapshot #2 or Video Clip to enter the detail setting page.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Send out the snapshot while motion detection There are three windows for motion detection each can be assigned a name. Select the windows which need to be monitored. If motion detection has not been set up, “undefined” will be shown instead of the window title. If this happens, clicking on “Motion detection” and a note will show to direct the User to the configuration page for motion detection.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 44 - User's Manual
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Video Clip The setting for video clip is mostly the same as snapshot. “Video clip max file size” This indicates the maximum file size for video clip (Kbytes). In the event that the available network bandwidth is limited, video clips sent to FTP or e-mail may be corrupted and can not be opened.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions System log The Network camera support log the system messages on remote server. The protocol is compliant to RFC 3164. If you have external Linux server with syslogd service, use “-r” option to turn on the facility for receiving log from remote machine. Or you can use some software on Windows which is compliant to RFC 3164.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Viewing system parameters Click on this link on the configuration page to view the entire system’s parameter set. The content is the same as those in CONFIG.INI.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Maintenance Four actions can be selected “reboot” click the reboot button to restart system “factory default” Click on Factory default button on the configuration page to restore the factory default settings. Any changes made so far will be lost and the system will be reset to the initial factory settings. The system will restart and require the installer program to set up the network again.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Appendix A. Troubleshooting Status LED The following table lists the LED patterns in general. Condition LED color Loading system after power on Steady red, blue, green During booting procedure Steady red, blue, green Detecting and setting network Steady green and blue. Blink red till physical network and IP address are confirmed.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions B. URL commands of the Network Camera For some customers who already have their own web site or web control application, the Network Camera can be easily integrated through convenient URLs. This section lists the commands in URL format corresponding to the basic functions of the Network Camera. Get server parameter values Note: This request require administrator access Method: GET/POST Syntax: http:///cgi-bin/admin/getparam.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress Response: HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: 33\r\n \r\n network.ipaddress=192.168.0.123\r\n Set server parameter values Note: This request require administrator access Method: GET/POST Syntax: http:///cgi-bin/admin/setparam.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: \r\n \r\n where is =\r\n [] Only the parameters that you set and readable will be returned. Example: Set the IP address of server to 192.168.0.123 Request: http://myserver/cgi-bin/admin/setparam.cgi?Network_IPAddress=192.168.0.123 Response: HTTP/1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions time (r/w) hour, minute and second separated by colon.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions userattr_<1~20> [conf] show user’s privilege. The privilege can be (r) - only permit to view live media conf – Permit to change server’s configuration usercount 1 ~ 21 The current account number on the server (r) including root.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions mailpass1 smtp2 name or IP secondary SMTP server than 40 characters> mailto2 mailuser2 mailpass2
VIVOTEK - A Leading Provider of Multimedia Communication Solutions (r/w) 40 characters> ftppasvmode2 1 Enable passive mode of primary FTP server (r/w) 0 Disable passive mode of primary FTP server httpport rtspport number less RTSP port (r/w) (restart) than 65535> <554> videoport audioport accessname
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 5 double 256 This field is obsolete (use resolution) resolution 176x144 (for mobile) Video resolution 176 x 144 (r/w) 160x120 Video resolution 160 x 120 320x240 Video resolution 320 x 240 640x480 (for Video resolution 640 x 480 computer) color 0 monochrome (r/w) 1 color quality 0 fix bit rate (r/w) 1 fix quantization quant 1 lowest quality of video (r/w) 2 lower quality of video 3 normal quality of video 4
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 25 set maximum frame rate to 25 fps 30 (for 60Hz only) set maximum frame rate to 30 fps 50 synchronize with 50Hz utility (r/w) (in CMOS 60 synchronize with 60Hz utility mode version only) whitebalance 0 auto white balance (r/w) (in CMOS 1 fixed indoor(3200K) version only) 2 fixed fluorescent (5500K) 3 fixed outdoor( > 5500K) flip 1 flip image (r/w) 0 normal image mirror 1 mirror image (r/w) 0 normal image impri
VIVOTEK - A Leading Provider of Multimedia Communication Solutions (r/w) mode settings. <0> contrast <-5 ~ 5> Adjust contrast of image according to (r/w) mode settings. <0> hue <-5 ~ 5> Adjust hue of image according to mode (r/w) settings.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions wintop_<0~2> 0 ~ 240 (r/w) Top coordinate of window position. <0> winwidth_<0~2> 0 ~ 320 (r/w) Width of motion detection window. <0> winheight_<0~2> 0 ~ 240 (r/w) Height of motion detection window.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions enable 0, 1 Enable or disable the UPNP presentation (r/w) service. <1> Group: UPNPfor NAME VALUE DESCRIPTION enable 0, 1 Enable or disable the UPNP port forwarding (r/w) service. <0> Group: App NAME VALUE DESCRIPTION scriptname
VIVOTEK - A Leading Provider of Multimedia Communication Solutions parameter value description move home Move to camera to home position up Move camera up down Move camera down left Move camera left right Move camera right speedpan -5 ~ 5 Set the pan speed speedtilt -5 ~ 5 Set the tilt speed speedapp -5 ~ 5 Set the auto pan/patrol speed auto pan Auto pan patrol Auto patrol stop Stop camera Redirect to the page after the return parameter is assign
VIVOTEK - A Leading Provider of Multimedia Communication Solutions current path. If you omit this parameter, it will redirect to an empty page. Application page CGI command Note: This request requires administrator privilege. Method: GET/POST Syntax (For snapshot): http:///cgi-bin/admin/gen-new-eventd-conf.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions [&_sq_interval=] [&_send_method=] [&_ftp_suffix=] Return: HTTP/1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Capture single snapshot Note: This request require normal user privilege Method: GET/POST Syntax: http:///cgi-bin/video.jpg Server will return the most up-to-date snapshot in JPEG format. The size and quality of image will be set according to the video settings on the server. Return: HTTP/1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions edit Modify the account password and privilege. When using this method, “username” field is necessary, and other fields are optional. If not specified, it will keep original settings. username The name of user to add, delete or edit userpass The password of new user to add or that of old user to modify. The default value is an empty string. privilege The privilege of user to add or to modify.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Configuration file Note: This request requires administrator privilege Method: GET/POST Syntax: http:///cgi-bin/admin/configfile.cgi Server will return the up-to-date configuration file. Return: HTTP/1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions C.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Technology License Notice MPEG-4 AAC Technology THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO PATENT LICENSE. THIS PRODUCT MAY NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT REGARD TO PC SOFTWARE, YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES. FOR MORE INFORMATION, PLEASE REFER TO HTTP://WWW.VIALICENSING.COM.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Electromagnetic Compatibility (EMC) FCC Statement This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. ■ This device may not cause harmful interference, and ■ This device must accept any interference received, including interference that may cause undesired operation.
