User`s manual

VIVOTEK
User's Manual - 63
A green bar indicates that even though motions have been detected, the event has not been triggered
becausetheimagevariationsstillfallunderthedenedthreshold.
Ifyouwanttocongureothermotiondetectionsettingsforday/night/schedulemode,pleaseclickProle
to open the Motion Detection Profile Settings page as shown below. A total of three motion detection
windowscanbeconguredonthispageaswell.
Pleasefollowthestepsbelowtosetupaprole:
1. Create a new motion detection window.
2. Check Enablethisprole.
3. Select the applicable mode: Day mode, Night mode, or Schedule mode. Please manually enter a time
range if you choose Schedule mode.
4. Click Save to enable the settings and click Closetoexitthepage.
This motion detection window will also be displayed on the Event Settings page. You can go to
Application > Event Settings > Trigger to choose it as a trigger source. Please refer to page 71 for
detailed information.
Percentage = 30%
Video(TCP-AV)
2010/01/13 13:44:17