User`s manual

VIVOTEK
36 - User's Manual
4.IntheNetworkingServicesdialogbox,selectUniversal Plug and Play and click OK.
5. Click Next in the following window.
6. Click Finish. UPnP
TM
is enabled.
►HowdoesUPnP
TM
work?
UPnP
TM
networkingtechnologyprovidesautomaticIPcongurationanddynamicdiscoveryofdevices
addedtoanetwork.Servicesandcapabilitiesofferedbynetworkeddevices,suchasprintingandle
sharing,areavailableamongeachotherwithouttheneedforcumbersomenetworkconguration.In
the case of Network Cameras, you will see Network Camera shortcuts under My Network Places.
►EnablingUPnPportforwardingallowstheNetworkCameratoopenasecondaryHTTPportonthe
router-not HTTP port-meaning that you have to add the secondary HTTP port number to the Network
Camera’s publicaddressin order to access theNetworkCamera fromtheInternet. Forexample,
when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for
the Network Camera’s IP address.
From the Internet In LAN
http://203.67.124.123:8080 http://192.168.4.160 or
http://192.168.4.160:8080
►If thePPPoEsettingsare incorrectly configuredortheInternet accessisnotworking,restore the
Network Camera to factory default; please refer to Restore on page 91 for details. After the Network
Camera is reset to factory default, it will be accessible on the LAN.