kahuna 1 Designed by UNIVOCAL in California. Made in China.
® Please read the following instructions carefully and use the product accordingly. ® To ensure the successful rectum, please keep the original manual and shipping box. ® This summary may not include every detail or all possible variations and the steps required to achieve them. Please contact us when further information and help are needed. ® The product must be assembled and used in accordance with the provisions of the manual. @® Avoid long-term exposure te humid environments to prevent mildew.
x1 = Hose x1 A Pair of Gloves Repair Kit and Spare Sealing Rings x25 (= Flower Labels 19.11n. Support Bar x1 x1 Water Bag Overflow Valve x1 x1 Drain Valve Water Tap Foot Mat 19.1In.
#TEE 4 Expand the #1 Water Bag and unzip the top zipper. STEP 2 Unscrew the #3 Drain Valve, and set the sealing rings {one inside and another outside) in the hole at the bottom of the #1 Water Bag.
STEP % Unscrew the #4 Water Tap, and mount the sealing rings {one inside and another #7Ep 4 Unscrew the #2 Overflow Valve, and install the sealing rings {one inside and outside) in the hole at the middle of the #1 Water Bag. another outside) in the top hole of the #1 Water Bag.
STEP SE Connect the #5 Fitting (8 pest, the #6 Fitting (8 pea) and #7 Fitting (8 pea) HEP & Insert the Support Bars (8 pea) into the upper pipe of the #1 Water Bag to finish together in the steps shown below. Please note that the end cap of #6 Fitting assembly. should face upwards.
