Safety Information .. Key Features Product Consistent Dimension. Specifications Application Installation .. Maintenance . Complete Your Setup Warranty Information.
Alphonse react the manual carefully and follow the Instructions before Installing and operating the fon. The Input voltage of this fan Is 110Visc~240Vac. DO NOT use the fan under higher Input voltages. The air transformed shall not be flammable, explosive, corrosive. The environment temperature shall not exceed 40°C. Direct spraying or scanning by water or other liquid Is forbidden. This may cause short clout or strict shock. Installation on window or outdoor le forbidden.
Series Part Flange Fan Unit Impeller Terminal Box Bucks Unit: mm Model No.
Ashore can bie used as an exhaust fan or an Intake fan for your grow space, and sate has diffraction setup position for optimal ventilation. Exhaust fan: Hung or mounted on the highest opposite comer Inside your grow space. Airflow arrow points away from your grow space. Intake fan: Mourned at a bottom corner outside of your grow space. Airflow arrow points toward your grow space.
© BAITING AS AS REE EAN Unscrew and loosen the buckles on the fan unit. Remove the fan unit farm the flange bracket.
Dri four hole and fixed the two flange brackets on the desired position of a wood support or stud with four wood screws. For mounting on surface other then wood, fix the wal anchors In the holes before screwing the wood screws to fix the flange brackets. Slide the fan ult beck between two flanges brackets, aka sure the airflow arrow on the fan unit ls the samey direction with that on the flange. bracket. Than tighten tha metal clamps to secure the fan unit.
Put the buckles back on the fan unit and fix with screws. Loop the two hanging straps around the flanges 4 shown in the diagram.
WERE Slip the strap through the Inner ladder lack soot from the bottom. & 3 Pass the strap Into the outer ladder lock slot farm the top. Adjust the length of the completed loop as needed.
H % Tuck the loose and through the canter gap of the Indexer lack to secure the lap. Es 3 Loop the other and of two hanging straps around apple as showed In picture. Hang the fan by the duct flanges to secure It a Adjust the height as needed to fit your specs.
13 fo HES Loop the two rope hangers around tha flanges as shown In the diagram. Lock the carbines to the ropes to accursed the fan. FILER Loop the attar end of the tops hangers strand the crossbeam es shown In the diagram. Lock the carbines to the rope to secure the fan to the pals. Press the yellow adjustment button to tales and lower the fan to your desired height.
SEEPS BARNS 8: hing Dae Loop the hanging straps around the pole and the flange brackets of the fan. Adjust and taught the hanging straps, as show In part A, Steps 2-4. Let the fan hang on the pole once the straps are secure.
5 Lop the two rope hangers around the pole and the flange bracket of the fan. Secure the two hooks to their respective ropes to hang the fan.
Beguiler cleaning ach year la suggested. Make sure to tum off power before cleaning. Unscrew and loosen the buckles on the fan unit and remove it from the flange brackets HERE Use a damp cloth to clean the fan blades and the Impeller. Remove the wind circle In between the fan unit and Intake flange. Clean tha Inside of Intake and exhaust flanges snd the wind circle.
” Gaslight / VS / VSX / VSF 100W-845W powerful LED grow light High PPE efficacy with Samsung LED Full spectrum included 0-100% dimming with daisy-chain ETL/ CE / FCC certificated Compatible with Grow Hub controller Premium grade of Australian charcoal High efficiency of abortion and long lifetime -4' 16 78 compatible with different Nine fans
BAP YY BAK 1. Wo offer a 3-year warranty against manufacturing defects for all of our products from the tads of purchase. If you naiad warranty assistance, please contact us as soon as possible 2. The warranty does not cover damage dus to high moisture levels, water damage, power surges, improper hanging/mounting, improper use, dust build-up, or users’ unauthorized modifications. 3.
