Snow Roof Rake Assembly Instructions THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Parts List and Diagram 1 pc. A 1 pc. B 4 pcs. D 1 pc. C 1 pc. E 1 pc.
Parts List and Diagram 4 pcs. 4 pcs. 1 pc. 1 pc. 1 2 3 4 Assemble Steps Step 1 1 pc. 1 pc. 1 2 Lay Part A within Part C as shown in the picture. A C 1 pc. 1 1 pc.
Assemble Steps Connect Part B, Part A, and Part C using Bolt 1 (4pcs.) and Nut 2 (4pcs.). Tighten using both Wrench 3 and Allen Key 4 as shown in the picture below. Step 2 1 pc. 1 pc. 1 2 A C B 3 4 1 pc. 1 pc.
Assemble Steps Step 3 Attach Part F onto Part A, again using Wrench 3 and Allen Key 4 to tighten. Depending on the length needed to clean your roof, you can attach up D(4 pcs) Parts Onto Part F, before finally attaching the handle (Part E).
To continuously improve its products, VIVOHOME reserves the right to modify this information without prior notification. For any questions during assembly, please watch the video on the product page for reference or contact our customer service with any questions, comments, or concerns.
