Instructions / Assembly

Lighting & Operating Instructions
(Figure 3). When lighting the burner, if ignition does not occur in 3 to 5 seconds,
turn the manual valve(s) and cylinder control o. Wait 5 minutes for gas to disperse.
Repeat the steps.
5. Check that the ame is blue and that the ames are emitted from every port in the
casting. If not, rotate the air shutter position until there is a blue ame. Opening the
shutter too much will cause the ame to “Lift” o the burner (Figure 6). If there is a
yellow ame, or if some ports have no ame, this indicates there may be an
obstruction in the venturi tube or ports. Check the maintenance instructions on
page 4 for more information regarding a yellow ame.
6. Always monitor the ame throughout the cooking process. If at any point in the
cooking process the ame is accidentally extinguished, immediately turn the
regulator and cylinder valve OFF. Wait 5 minutes for gas to disperse and relight the
cooker according to the lighting instructions (#1-5) in this section.
-7-
(Figure 6)
(Figure 5)(Figure 4)(Figure 3)
(Figure 2)
(Figure 1)