Instructions / Assembly
Maintenance & Care
1. The area where the cooker will be used must be kept clear and free from
combustible materials, gasoline and other ammable vapors and liquids. Before
each use of the cooker, inspect and remove any combustible items.
2. The ow of combustion and ventilation of air must not be obstructed. The cooker
must be set in an open area with 10 ft. (3.05m) of space on all sides and no roof or
overhang overhead. Check the location and placement of the cooker before each
use.
3. Before each use of the appliance, check the burner/venturi tube for insects, insect
nests, and other obstructions. A clogged tube can lead to a re beneath the
appliance.
4. Follow all Lighting Instructions on page 6-7 each time the cooker is used. Check the
ame for proper color and appearance. The ame should burn with a primarily blue
color. If a strong yellow ame is present, this could indicate an obstruction in the
burner/venturi tube. If there is any obstruction or a yellow ame, and the air shutter
adjustment has not solved the problem, turn o the cooker and allow time for it to
cool. Disconnect the hose from the cooker. Remove the air shutter using a phillips
head screwdriver. Check the venturi tube with a ashlight to see if there is a
blockage. If a blockage is present, use a wire such as a coat hanger to slide into the
venturi tube to remove the blockage. Reattach the air shutter to the venturi tube
using the phillips screwdriver. Assemble and light the cooker again as per the
instruction manual.
5. Always use the LP Hose/Regulator assembly supplied with the appliance. Before
each use of the appliance, check the LP Hose for evidence of abrasion, wear, cuts or
leaks. If there is any damage to the hose, the hose/regulator assembly must be
replaced prior to using the appliance. Only the LP Hose/Regulator assembly
specied by VIVOHOME should be used with the appliance.
6. For purchase of any replacement parts which may have become damaged or lost,
please feel free to contact us for help.
CLEANING THE APPLIANCE
1. Cooker & LP Hose/Regulator:
If necessary, remove any oil or liquid which has spilled onto the unit during cooking
with mild soapy water on a rag and a dry towel. Do not immerse the burner unit or
hose and regulator into water as this will cause rust.
2. Aluminum or Stainless Steel Pots:
Clean after each use according to the directions on following page.
3. Cast Iron Cookware:
Clean after each use according to the directions on following page.
-4-