User Manual

ASSEMBLY STEPS

STEP 1

OPTION A:

Mount the clamps (B) to the front holes under the pad (A) using M6x20 bolts (C), and tighten with

the 4mm Allen wrench (D). Ensure that the clamps are facing towards the rear (flat) side of the pad.

PACKAGE CONTENTS

WARNING!

A (x1)

Pad

B (x2)

Clamp

If you do not understand these directions, or if you have any doubts about the safety of the installation,

please call a qualified technician. Check carefully to make sure there are no missing or defective parts.

Improper installation may cause damage or serious injury. Do not use this product for any purpose that is

not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or

injury caused by improper mounting, incorrect assembly or inappropriate use.

11lbs

(5kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

C (x4)

M6x20

D (x1)

4mm Allen Wrench

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

M6x20 (x4)

S=4mm