INDEX IMPORTANT INFORMATION............................................................2 1. 2. 3. 4. 5. 6. WARNING.......................................................................................2 SAFETY GUIDELINES...................................................................3 IMPORTANT SAFETY INSTRUCTIONS........................................4 ANTENNA INSTALLATION SAFETY.............................................6 CLEANING THE LCD TV.........................................................
IMPORTANT INFORMATION 1. WARNING WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an quilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT INFORMATION 2. SAFETY GUIDELINES WARNING: This device must be operated with the original power supply. Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below: USA..................UL Canada.............CSA Japan ...............
IMPORTANT INFORMATION 3. IMPORTANT SAFETY INSTRUCTIONS Follow and obey all warnings and instructions marked on the LCD TV. For your safety, please read all the safety and operating instructions before you operate the LCD TV. Keep this user’s manual for future reference. (1) Read these instructions. (2) Keep these instructions. (3) Heed all warnings. (4) Follow all instructions. (5) Do not use the LCD TV near water. (6) Clean only with a dry cloth. (7) Do not block any ventilation openings.
IMPORTANT INFORMATION •Never cover the slots and openings with a cloth or other materials. •Do not place the LCD TV in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction have been adhered to. 8 •Other Notices ・Avoid exposing the LCD TV to direct sunlight or high temperatures. ・Avoid exposing the LCD TV to moisture or high humidity ・Do not attempt repairs yourself.
IMPORTANT INFORMATION 4. ANTENNA INSTALLATION SAFETY •Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges.
IMPORTANT INFORMATION 6. DISC 6-1 On handling discs Playback side 6-2 On cleaning discs • Wipe the disc with a clean, dry cloth from the center outward toward the edges. • Do not wipe the disc in a circular motion around the center. • Do not use liquid or aerosol cleaners. 6-3 ON storing discs • Store the disc in the case to avoid any risk of scratches, dirt or damage. • Do not leave the disc exposed to disc exposed to direct sunlight or in hot or humid places.
IMPORTANT INFORMATION 6-5 Region management information The region number of this unit is 1. If region numbers, which stand for their playable area, are printed on your DVD video disc and you do not find " 1 " or " ALL " , disc playback will not be allowed by the player. (In this case, the unit will display a message on-screen.) Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable.
PREPARATION 1.
PREPARATION 2. TV CONTROLS 10 1. MENU Turn the Menu ON/OFF 2. VOL + / - Adjust (VOL + / -) sound volume or adjust a highlighted control while in the Menu. 3. CH + / 4. INPUT 5. 6. 7. Adjust (CH + / -) channel when input is TV or adjust a highlight control while in the Menu. Select Active Video Input or choose a selection while in the MENU.
PREPARATION 3. TERMINALS 2 4 3 6 5 8 7 1. VGA Audio IN Connect to the Audio out (Green) from a computer. 2. VGA Using a 15-pin VGA cable, connect to a computer or other device with a VGA output. 3. YPbPr1 Input Connect an external video device with component output to these jacks. 4. YPbPr2 Input Connect an external video device with component output to these jacks. 5. YPbPr1 Audio 1 Input (Left / Right) Connect an external audio source to this jack. 6.
PREPARATION 4. REMOTE CONTROL Remote Control 1.POWER Switch TV power On/Off. 2.Mute Mutes the sound. 3.DVD Eject Eject the DVD disc. 4.PC Select VGA source input. 5.DVD Select DVD source input. 6.TV Select TV (NTSC/ATSC) source input. 7. HDMI Select HDMI 1/HDMI 2 source input. 8.VIDEO Select Video/S-video input. 9.YPbPr Select YPbPr1/YPbPr2 source input. 10.Favorite Select, remove or add your favorite channel.Press Favorite (A, B, C) key to access favorite list.
PREPARATION 16.Vol +/- Volume Up / Down adjustment. 17.Last CH Switch to previous channel. 18.Menu Display the menu screen. 19.▲/▼/◄/► Selects a desired item on the screen. 20.Enter Execute a command. 21.INFO Display the source and channel 22.Guide Show program information of current information. channel. 23.DVD (Setup) button 24.■(Stop) 25.► Press when there is a disc in the player to open or close the setup screen. Press to stop playback.
INSTALLATION 1. INSERT BATTERIES IN THE REMOTE CONTROL (1) Remove the battery cover. (2) Insert the batteries corresponding to the (+) and (−) marks on the battery compartment. (3) Re-attach the battery cover. CAUTION: (1) Only use AAA batteries. (2) Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. (3) Insert batteries according to (+) and (−) markings.
INSTALLATION 2. ANTENNA CONNECTION 2-1 Outdoor Antenna Connection English Cable TV lead-in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) or 300 ohm twin-lead (flat) 300-75 ohm ADAPTOR (Not supplied) RF IN Separate VHF/UHF Antenna VHF ANTENNA Home Antenna terminal (75 ohm) UHF ANTENNA 300 ohm twin-lead COMBINER (Not supplied) 300 ohm twin-lead IN OUT or 75 ohm coaxial cable ►Notice: F-type connector should be finger-tightened only.
INSTALLATION 3. EXTERNAL DEVICE CONNECTIONS You can enjoy picture and sound by connecting a DVD or video game system to the terminals located on the rear of the LCD TV set. When connecting an external device, turn off the power of the LCD TV set first to prevent any possible damage. ø 3.
INSTALLATION Video Audio/Video cable Audio (L) Audio (R) S-Video cable Home video game system Camcorder VCR Audio/Video cable Audio (R) Audio (L) * If your external device has an S-video terminal, S-VIDEO connection is recommended. Antenna cable Optical fiber cable AUDIO OUT Cable system or antenna Audio amplifier AUDIO OUTPUT terminal • For the cable, use a commercially available audio/video cable.
INSTALLATION 4. POWER CONNECTION Connect the power cord to the DVD combo LCD TV then to a proper AC outlet. IMPORTANT: The power input voltage is 120VAC, 60 Hz ONLY, Before beginning, make sure all devices are turned off. 5. INITIAL SETUP When you setup the LCD TV for the first time or Reset all on OSD menu is pressed, the Setup Wizard will be initialized.
INSTALLATION Setup Wizard (1) Press "▲ / ▼ " to select the language for menu and message showing on your TV, press Enter key to exit Setup Wizard menu. English (2) Press ENTER to access Time Zone settings. Press " / " to select on your time zone. (3) Press ENTER to access Daylight Saving screen. Press " / " to select “Yes” or “No”, when you observe daylight saving.
INSTALLATION (4) Press ENTER to access RF Input Source screen. Press " / " to select the source for your TV signal. ►Note: Select STD(Standard) for majority of cable systems. (5) Press ENTER to start the Channel Scan. Scanning channel searches available digital (HDTV) and analog (SDTV) channels of selected TV source, the numbers of available channels will show on the OSD menu.
BASIC OPERATION 1.TURNING ON AND OFF THE POWER Lighting (Blue) Power OFF Light Off Power • Turning On the Power Press on the TV or on the remote control. ・POWER indicator (Blue): The TV is on. • Turning Off the Power Press on the TV or on the remote control. ・The TV enters standby mode and the image on the screen disappaers. ・The POWER indicator on the TV turns off. ►Note: ・If you are not going to use this TV for a long time, be sure to remove the AC power cord from the wall outlet.
BASIC OPERATION 3.CHANGING CHANNELS ・You can select channels using Channel Select (0-9, • (DOT), ENT) or CH (+)/(-). • Using Channel Select (0-9, • (DOT), ENT) When selecting the channel using Channel Select, complete input of the channel number by holding down the button for the last digit for a moment. •To select a 1- or 2-digit channel number (e.g., Channel 5): Complete the following procedure within 4 seconds. 1.Press the 0 button. 2.Press the 5 button. 3.Press the ENT button.
BASIC OPERATION 5.SELECTING MENU ITEMS ►NOTE: •The items displayed differ depending on the setting conditions. •The item selected is displayed in blue. •Last setting will be saved in memory. •Using the remote control 1&4 2 3 1. Press on the remote control to display the Menu screen. 2. Press ▲ / ▼ to select the desired menu item. 3. Press Enter to select the menu item. 4. Press to exit. •Using the control panel of the main unit You can also operate the menu with the control panel of the main unit.
MENU OPERATION •Menu Setting screens For details of each menu item, refer to the page number indicated below. ►NOTE: •The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual appearance. •Depending on the setting condition, such source input , it may not be possible to adjust or set some items. Settings Video Page Menu Language..........................42 Date & Time.........................................42 Weekly Timers.................
MENU OPERATION 1. VIDEO •You can adjust the Video to your preference with the following Video settings. English 1.Press MENU on the remote control to display the menu screen. 2.Press ► / ▲ / ▼ to select the Video menu. 3.Press Enter to enter the Video meun list. 4.Press ▲ / ▼ to select the desired menu item. 5.Press Enter to select the menu item. 6.Press EXIT to exit after finish adjustment.
MENU OPERATION 1-1 Preset Mode: Upon the watching program, you can select an appropriate video setting with the preset mode. Selected Item Movie Sports Game Enhanced User Description Controlling the contrast to enable easier viewing of dark images. For a clear-cut image emphasizing high contrast for sports viewing. Controlling the brightness of video games and other images for easier viewing. Increased color and sharpness for vibrant out of box performance Allows the user to customize setting as desired.
MENU OPERATION 1-3 Screen Size: The Screen Size sub-menu option adjusts the manner in which source signal formats are displayed on the screen. English *You can also use on your remote control for this function.
MENU OPERATION 1-5 VGA Setting: Adjust VGA Setting of your TV (Horizontal, Vertical, Phase, Auto Sync). ►Note: •Make sure to select the input signal from the following PC Compatibility Chart before a PC. Selected Item ◄button ►button Move the image Horizontal position Move the image Horizontal position to the left. to the right. Move the image Vertical position Move the image Vertical position up. down.
MENU OPERATION 1-6 Video Reset : Reset all Video sub-menu options to the factory defaults. English 2. AUDIO 2-1 Bass, Treble & Balance: Use ▲ / ▼ / ◄ / ► to select or adjust your favorite bass, treble and balance settings.
MENU OPERATION 2-2 Optical out (SPDIF): Select the audio format for Optical Out (AC3, PCM). Selected Item Description AC3 Select surround audio format PCM Select stereo audio format ►Note: •Optical Out (SPDIF) is only available for DVD or when receiving digital broadcasting. 2-3 Analog Preference: The Analog Preference sub-menu sets the audio output to the desired listening preference.
MENU OPERATION 2-4 Digital Preference: Select the digital Broadcasting preferred language (English, French, Spanish). English Selected Item Description English Set Digital Broadcasting preferred language to English French Set Digital Broadcasting preferred language to French Spanish Set Digital Broadcasting preferred language to Spanish ►Note: •Digital Preference is only available when receiving digital broadcasting. 2-5 TV Speaker The TV Speaker sub-menu sets the speaker output preference.
MENU OPERATION 2-6 Audio Only. Audio Only is a listening mode by turning off the LCD backlight and allowing the current input’s audio to remain “on” for listening. You can enable Audio Only mode from OSD menu. On: enable Audio Only mode. When Audio Only is on, LED light shows blue. Note: Volume +, Volume -, Right Arrow, Left Arrow, and Mute on the remote control can still control the system volume level as a normal operation. Cancel: disable Audio Only mode Audio Only model could be disabled via below. a.
MENU OPERATION 3. CHANNELS English 3-1 Channel List The Channel List sub-menu defines which channels are available for viewing when utilizing the analog/digital tuner.
MENU OPERATION 3-2 Favorites The Favorites sub-menu adds or subtracts channels from the favorite channels list. Channels added to the list can be accessed by pressing the FAV A,FAV B or FAV C button on the remote control instead of directly entering the channel number. The following sub-menu items allow for modification of the favorite channel lists.
MENU OPERATION 3-3 Scan Channels The Scan Channels sub-menu automatically scans for available channels based upon the source input selected. If scanning for OTA (over the air) channels, select Antenna as the input source. If scanning for Cable channels, select Cable as the input source English After selecting the input source, activate the Scan button to initiate scanning or cancel the scan function by selecting Stop Scan.
MENU OPERATION 3-4 Find Channel The Find Channel sub-menu allows for manual addition of user specified channels. 3-5 Edit Channel Name The Channel Name Edit sub-menu allows for modification of the friendly name of any channel within the channels list. To modify a channel name, select the Channel Name Edit sub-menu, scroll through the list of available channels and press the ENTER button to modify the desired channel name. Enter the new channel name using the on-screen characters.
MENU OPERATION 4. LOCKS A personal identification number (PIN) will need to be created the first time the Locks menu is accessed. Enter the new PIN using the remote control, then confirm the new PIN to save it. Once the PIN has been created, the PIN Entry box will appear whenever attempting to modify the Locks menu. Once the PIN has been configured, the user has access to 6 sub-menu items.
MENU OPERATION 4-1 Rating Locks The Ratings Locks sub-menu blocks programming based upon the TV or Movie rating for the country specified. ►Note: The Ratings Locks are only valid for the North American market. ►Note: The Ratings Locks menu is only applicable when the input source is the TV tuner. USA TV Ratings as determined by the FCC.
MENU OPERATION Canadian (French) ratings as defined by the Regie du Cinema. General programming, suitable for all audiences Children eight years and older Viewers 13 years and older Viewers 16 years and older Adult programming Canadian (English) ratings as defined by the Regie du Cinema.
MENU OPERATION 4-2 Channel Locks The Channel Locks sub-menu provides individual channel blocking regardless of any ratings lock in place. 4-3 Front Panel Lock This important feature is for use in an environment where the display’s owner does not want the conditions of the display changed.You can enable or disable it from OSD menu. 4-4 Change PIN The Change PIN sub-menu allows the user to set up a new PIN. The original PIN is required to make any change.
MENU OPERATION 4-5 DVD Locks Set restriction of DVD programs with Rating Locks. English Selected Item View All Kid Safe No Adult Description No Lock. Just release the content appropriate for children under 12 Just lock the content appropriate for adult. 4-6 Reset Locks Reset all channel and rating locks to the factory defaults.
MENU OPERATION 5. SETTINGS 5-1 Menu Language The Menu Language sub-menu toggles the default language for the on-screen display menus. 5-2 Date & Time Set the current time and date. 1.Press ► to set the current time and date on TV.
MENU OPERATION Note:When you check the “Auto-Update Time”, you cannot adjust the date and time. 4. Press ▲ to select “Today’s Date”. 5. Press ENTER to adjust the “Today’s Date”. 6. Press ▲/▼ or number key (0-9) until the correct Month appears. 7. Press ► to select Date. 8. Repeat item 6 and 7 to adjust Date & Year. 9. Press ENTER to exit after finishing adjustment. 10. Press to select “Current Time”. 11. Press ENTER to adjust the “Current Time”. 12.
MENU OPERATION 16. Press▼ to select “Time Zone”. 17. Press ENTER to list to Time Zone. 18. Press ▲ or ▼ to select the Time Zone you stay. 19. Press ENTER to exit. 20. Press▼ to select “Daylight Savings Observed”. 21. Press ENTER to check it if your time zone observes the daylight saving. 22. Press▼ to select “Done”. 23. Press ENTER or ◄ to exit after finishing adjustment. Note: •After finishing adjustment, please don’t check the “AutoUpdate Time”.
MENU OPERATION 5-3 Weekly Timers This function allows you to set the TV to turn on and off at scheduled time. You can set two different timers. English 1.Press ▲ to choose Timer. 2.Press ENTER to select “Timer 1” or “Timer 2”. 3.Press ▼ / ► / ◄ and ENTER to check the days you desired. 4.Press ▼ to set the Start Time. 5.Press ENTER to adjust the “Start Time”. 6.Press ▲/▼ or number key (0-9) to set the “Duration” 7.Have a check on “Timer is on”. 8.Press▼ to select “Done”. 9.
MENU OPERATION 5-4 Sleep Timer This function allows you to set the sleep time to automatically turn off the TV.
MENU OPERATION 5-5-2 Basic Selection The Basic Selection sub-menu configures the video frame field setting for closed captioning content. Most closed caption content can be found within CC1. English 5-5-3 Advanced Selection The Advanced Selection sub-menu provides enhanced closed caption options for the CC experience. ►Note: •Advanced Selection is only available when receiving digital broadcasting.
MENU OPERATION 5-5-5 Caption preference The Caption Preference sub-menu sets the default caption. If Automatic, the caption is determined by the broadcast. 5-5-6 Reset CC Reset all Closed Caption settings to the factory defaults. 5-6 Input labels The Input Labels sub-menu allows for modification of the friendly name for the input port list.
MENU OPERATION 5-7 Autosource If the "Autosource" is ON. once you plug in or power on a new source, the TV will detect it and automatically switch to the new input. English 5-8 Power Management The Power Management sub-menu configures the power state of the LCD-TV when turned off. Selected Item Normal Energy Saving Description The TV into a low power standby state. And the TV can be turned on quickly. The TV turns off all power. And the TV must be fully booted each time.
MENU OPERATION 5-10 Power LED Set LED indicator on bezel to On or OFF Selected Item ON OFF Description Turn on LED indicator Tuner off LED indicator 5-11 DVD Restoration DVD Restoration Mode is a functional setting that restores the anamorphic DVD to its original intended viewing mode. This is done by determining the flag setting and adjusting Standard Aspect Mode accordingly.
MENU OPERATION 5-12 System Info 5-13 Reset All Reset all settings back to factory defaults. Reset All will delete all settings you have made including language, time zone, channel list....etc. You must run Setup Winzard after a reset, please refer to page 18. 51 English The System Info sub-menu provides detailed information about the LCD-TV and its operating status. Information provided includes the system firmware version as well as the current input source and signal types being decoded.
MENU OPERATION 6.ADVANCED You can adjust the video to your preference with the following settings. 6-1 Cinemotion Detect a film-based source (originally encoded at 24 frames/second) and then recreate each still film frame to cinematic picture quality (ON, OFF).
MENU OPERATION 6-2 3D Comb Filter Select 3D comb filter to Off,Low,Medium,High. Off Low Medium High Description Set 3D Comb Filter to Off Set 3D Comb Filter to Low level Set 3D Comb Filter to Medium level Set 3D Comb Filter to High level 6-3 Deinterlaced Select image display to Progressive or Interlace (ON, OFF). Selected Item Description ON Display image in Progressive scan OFF Display image Interlace 6-4 Noise Reduction Reduce noise from TV screen.(Off,Low,Medium,High ).
MENU OPERATION 6-5 Brightness Selected Item Brightness ◄button For less brightness ►button For more brightness ◄button For less contrast ►button For more contrast Selected Item Saturation ◄button For less color intensity ►button For more color intensity Selected Item Hue ◄button Skin tones become purplish ►button Skin tones become greenish ◄button For less sharpness ►button For more sharpness ◄button The screen dims ►button The screen brightens 6-6 Contrast Selected Item Contrast 6-7 Satur
MENU OPERATION 6-12 Reset Advanced Reset Advanced Settings to factory preset values. English 7.GUIDE The Guide menu displays program information for the current channel such as signal strength, audio/video signal type, channel number, V-Chip support, closed captioning status and program title. ►Note: The Guide menu is only applicable when viewing digital television through the TV tuner.
PLAYING A DISC 1.PLAYBACK PROCEDURE EJECT DVD Power (1) Press POWER on the unit or on the remote control to turn on the unit. ・Every time you press POWER, the TV/DVD will starts from previous mode. (2) Press DVD on the remote control to select DVD mode. ・The DVD startup screen will appear on the screen. (If DVD disc has already loaded, playback will start automatically.) (3) Load the disc in the disc slot. ・Load the disc in the disc slot with the label side facing upward. (If the disc has a label.
PLAYING A DISC 2.SPECIAL PLAYBACK English (1).Fast Forward Playback Press ►► during normal playback. Each press of ►► will increase the speed of the search (x 2), (x 4), (x 8), (x 20). To resume normal playback, press ► to play. (2).Fast Reverse Press◄◄ during normal playback. Each press of ◄◄ will increase the speed of the search (x 2), (x 4), (x 8), (x 20). To resume normal playback, press ► to play. (3).Still Playback Press ► during normal playback to pause playback.
PLAYING A DISC 3.DVD SETTINGS Under DVD source, press Setup on remote control if you want to change the default DVD settings. Selected item Down Mix Repeat Demo Mode Subtitle Autowake Audio Select Reset DVD Description Select DVD Down Mix to Stereo or LT/RT. Press ENTER repeatedly to set “Chapter”, “Title”, “All” or “OFF”. ON: 1.Skip the meun screen to playback.It will be convenient for display. 2.
MP3/WMA/JPEG CD Playback This TV/DVD can playback the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/JPEG-data, you need a Windows-PC with CD-R/RW drive and a MP3/WMA/JPEG-encoding Software (not supplied). The Apple-HFS-System cannot be played. 1. MP3/WMA/JPEG CD information Limitations on MP3/WMA/JPEG CD playback ・MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “mp3”, “wma”, “jpg”.
MP3/WMA/JPEG CD Playback Standard, sampling frequency, and the bit rate: MP3 CD MPEG-1 Audio 32kHz, 44.1kHz, 48kHz 32kbps ~ 320 kbps (constant bit rate or variable bit rate) The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant bit rate. WMA CD Upto 4kbps (bit rate) The file recorded by mono, 48kHz, 48kpbs is not available to this unit.
SPECIFICATIONS Model Name Panel SK-26H590D Type Viewing Angles Input Signal Video/Audio WXGA LCD, 1366 x 768 vertical stripe Anti-reflective coating < 2% reflection English Color 26" (26" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix 160° (H) / 150° (V) VGA Analog * 1 (75 ohms, 0.
SPECIFICATIONS Model Name Panel SK-32H590D Type Color Viewing Angles Input Signal Video/Audio 32" (32" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix WXGA LCD, 1366 x 768 vertical stripe Anti-reflective coating < 2% reflection 176° (H) / 176° (V) VGA Analog * 1 (75 ohms, 0.
TROUBLESHOOTING •No Power ・Make sure power button is ON (Blue LED). ・Make sure AC power cord is securely connected to the AC socket. ・Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage. •AUDIO Interconnection Issues ・Remember that S-Video and Composite (VEDIO) share the same audio source.
APPENDIX APPENDIX A: Remove the base Step-1 To lay the front bezel down on a soft and clear area, and please be sure that there is no any foreign object on it for avoiding any scratch or damage. Step-2 Remove the four screws as shown in thefollowing illustration. Step-3 Remove the base from LCD TV. ►Note: ・Be sure to turn off the LCD TV and disconnect all cables before detaching the base. ・The LCD TV has VESAÒ FPMPMIä compliant 100x100mm and 75x75mm mounting holes.
