Use And Care Manual

SENSOR SETUP

2. Insert the included AAA batteries into the battery compartment,

making sure that they are inserted with the correct polarity (+,-_ as

displayed in the battery comartment.

3. Press and hold the power button for approximately 7 seconds so

that your sensor enters Wi-Fi setup mode.

4. The LED indicator light will turn red and ﬂash rapidly once your

sensor is in Wi-Fi setup mode.

1. Hold the battery compartment cover and rotate it in a

counter-clockwise direction to access your sensor’s battery

compartment.

LED Indicator Light

(Flashing rapidly) = Ready for Wi-Fi Connection