User Guide

18
camera and must hold the pose for at least 4 to 5 seconds until the green square(s) appears
around the subject`s face.
Once a smile is detected the camera will automatically take the picture.
Smile Capture will not work with a side shot of the subject`s head.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
3) Press the UP or DOWN direction control buttons to scroll through the menu options.
4) Press the SET button to select the desired option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
8) An icon reflecting your selection will display on the LCD screen.
9) Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Macro Menu
With the Macro feature you can capture images at close range (30 ~ 45 cm). To enable the Macro
mode, select „On‟. The flower icon will appear on the LCD and indicates that the Macro
mode is ON.
To return to the normal mode and disable the Macro mode, select „Off‟. The mountain icon
will appear on the LCD. When Macro mode is off, images can be captured from 1.5m - infinity.
Note:
 The Macro mode must be turned OFF when you want to use the following features of your
camera: Flash, Face Detect and Smile Capture.
 To turn Macro mode off, select the Macro „Off‟ option. The mountain icon will appear on the
LCD.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.