Instruction manual

LIGHTING FOR DIGITAL
SUNPAK
381
[phone] • 1-800-947-9927 • Quick Dial 64
PHOTO - VIDEO - PRO AUDIO
TR-2000
High Voltage Battery Pack
A universal high-voltage
battery pack, the TR2000 is a
flexible power source for
both high and low-voltage
flashes, including
non-Sunpak
brands.
Whether you
need 6 or 330v,
you have it with the
TR2000. Compatible with Quantum Turbo
(HV) or Battery 1+ (LV) flash modules.
Continuous, unlimited power is possible
simply by swapping interchangeable nicad
power clusters. A power status indicator lets
you know when to insert a fresh battery clus-
ter, and Memory-Free technology ensures you
have 100% capacity every time. Only 24
ounces, and a compact 5 x 6 x 2.5˝ with
battery cluster. Shoulder strap and battery
charger included.
DIGITAL FLASHES
TR-2000 High Voltage Battery Pack Kit
(SUTR2000): Includes battery pack, nicad cluster,
AC charger and strap. (Requires MC series
connector cord) .......................................249.95
2400mAh Nicad Battery for TR-2000
(SUNB2000): Replacement............................67.50
3000mAh NiMH Battery for TR-2000:
(SUNIMHB2000) .............................................89.95
MC-3023: 10´ 2-Pin High-Voltage Connector
Cord for TR-2000:
(SU2PCFS) .....................19.95
MC-3024: 10´ 3-Pin High-Voltage Connector
Cord for TR-2000:
(SU3PCFS) .....................19.95
MC-3025 10´ 3-Pin High-Voltage Connector
Cord (PZ-Series) for TR-2000:
(SU3PCPZ) .19.95
◆ 270 full power manual shots, and 1000+
automatic shots per charge
◆ Ergonomically contoured design with
tough, non-slip rubberized surface
◆ Microprocessor control for safe, reliable
operation, provides regulated high and low
voltage outputs
◆ Works with fast, snap-in nicad or ultra high
capacity 3000mAh “memory-free” NiMH
battery cluster
◆ On-demand power status with or without
battery mounted on power pack
◆ Rechargeable up to 1000 times
FP-38 Flat Panel Flash
The slim FP-38 is less than one 1˝ thick and
weighs only 9.8 ounces. It mounts onto any
camera using the supplied “Hot Shoe” mounting
bracket . It can also be mounted using the op-
tional “L” shaped handgrip or the Mini Tripod
with Extension Arm. Two FP 38 units can be
mounted together on one Hot Shoe bracket and
can be simultaneously fired with the built-in slave feature.
◆ Can be mounted horizontally or vertically.
◆ Large, diffused surface area creates a soft box effect.
◆ Powered by 4AA batteries or the Sunpak Universal AC
Adapter Kit
(ACC-M1035-01)
FP-38 Flat Panel Flash Kit (SUFP38): Includes sync cord and 4 AA batteries ......74.95
Flash Grip and Extension Arm
(SUMCEFFGEA).....................................................44.95
DigitFLASH 500/1000
The DigitFlash 500 and DigitFlash 1000 are 500 w/s and
1000 w/s flat panel flashes with a dimmable fluorescent
modeling light. The power of the flashes range from full to
1/32 power. These unique flashes provide soft, even illu-
mination for 3/4 length portraits or medium size product
shots, eliminating the need for a softbox, and takes up a
fraction of the space of a conventional strobe with softbox.
DigitFlash 500 (SUMDF500) ..............488.95 DigitFlash 1000 (SUMDF1000).........659.95
DigitLITE 600
The DigitLite 600 is a fluorescent light panel that provides daylight-balanced, flicker-
free constant light. It is suitable for use with digital or film cameras, and is less than
3˝ thick. The 5600° K light output is very soft, coming from 6- 24 watt tubes. The
electronic ballast offers full adjustment of power level.
◆ Soft, uniform, diffused light. ◆ Low power consumption.
◆ This size is suitable for a head-and-shoulders portrait, or small product setup.
DigitFlash 600
(SUMDL600)...........................................................................................374.95
◆ Quiet, and cool-running, with
long-life linear flash tubes and
flicker-free fluorescent modeling light.
◆ Portable and lightweight.
◆ Dual sensitive slaves ensure
synchronization with other strobes.
◆ Rear control panel offers full control
over flash and modeling light output.