Instruction manual
LIGHTING FOR DIGITAL
NOVOFLEX
376
ww w.bhphotovideo.com
FLASH SUPPORT
PHOTO - VIDEO - PRO AUDIO
Flash-Grip Extension Sets
To increase the flexibility of the flash mounting systems, Novoflex offers various ex-
tension sets for the Flash-Grip. This enables you to implement complex ideas with-
out affecting the stability or compactness of the entire system.
Flash-Grip Extension Set I (NOEG8)
Rigid grip extension to achieve increased height of the flash by 8˝. Weighs 1.5 oz.......39.95
Flash-Grip Extension Set II (NOG102)
Flexible arm increases the height of flash and general position in relation to camera body
by 9˝. This is mounted between the grip and the ball head. Weighs 10 oz ....................52.95
Flash-Grip Extension Set III (NOEFG)
Variable rod to move the flash freely over a length of 10˝. As a result you can position the flash directly above the optical axis. But also at a distance
of
up to 12˝ from the camera. Whether you shoot in horizontal or vertical format, the flash can always be positioned optimally. Weighs 10 oz ...........74.50
The Flash Grip (NOFB)
Mounted on a base plate, the Flash Grip offers the facility to mount a large flash unit securely
with ease, either screwed directly onto the ball head, or mounted in the detachable flash shoe. Of
particular note are the possibilities of positioning the flash, and the secure handling of the entire
assembly, aided by the fitted handstrap. To save maximum space on the move, the handgrip is
detachable. Comes with a grip, strap and a ball head. Weighs 15.9 oz. complete......................142.50
The parts which make up the Flash-Grip are also available separately:
Base Plate
(NOBP): 10 x 1.6 x 3.1˝, weighs 8.1 oz. (This is the same base plate used by the
Duo Flash Holder, and both the Vertical and Horizontal Extension Sets).................................129.95
Grip
(X-GRIFF): With handstrap but no ball head, weighs 5.6 oz .................................................CALL
Ball and Socket Head
(NOMBFS): With flash accessory shoe, weighs 2.1 oz ................................CALL
Novoflex has for many years provided the answer to the problem of positioning and holding flashes: Flash support systems of
outstanding stability and adjustability from years of practical experience in the use of flash units and portability through low
weight. Now Novoflex introduces the flash support system of the third generation: enormously flexible with minimum space
required when on the move, yet infinitely versatile.
Duo-Flash-Holder (NOHDF)
The Duo-Flash-Holder allows free positioning of two flash heads. With it you no longer have to compromise in terms of
either ease of use or compactness and portability. Duo-Flash-Holder is the smart answer to these problems. Both flash units
can be freely positioned and rapidly adjusted. The Base Plate is mounted to the camera bottom. The Vario-System is
equipped with two ball and socket heads with flash accessory shoes, and can be freely twisted and moved along. As the
ball and socket head can be mounted anywhere on the rods, you have an infinite variety of positions for your flash.
If the situation demands a change in the setup, this is achieved quickly. At the end of the shooting session, Duo-
Flash-Holder is dismantled quickly and is ready to be stored out of the
way in almost any gadget bag.
With other accessories from the Novoflex system you
can turn the Duo-Flash-Holder into a small flash
studio. It is recommended for all application
utilizing the Novoflex Auto-Duo-Flash, Flash Art
and virtually all commonly available flash units.
Measures 14.2 x 1.6 x 3.2˝ when dismantled for storage, weighs 13 oz. ............................209.95