Manualshelf

Use And Care Manual

ManualsBrandsVivitar ManualsDoorbells1080p Wi-Fi Video Doorbell with Wireless Chime
12345678910
2. Once your doorbell is installed and powered on, the LED Light
Ring will illuminate and then start to flash to indicate that your
doorbell is ready for Wi-Fi Connection.
1. For best results, insert a 8-32GB Micro SD card (not included) into
the Micro SD memory card slot.
LED Light Ring
(flashing) = Ready for Wi-Fi
Connection
NOTE: If you are having trouble connecting to Wi-Fi, press and hold
the reset button for approximately 5 seconds to reset your doorbell.
DOORBELL SETUP
9.
Reset Button
Micro SD
Card Slot