DB-270 I QUICK START GUIDE
1. WHAT’S INCLUDED DB-270 Wireless Video Doorbell Mechanical Chime Kit Wireless Chime Reset Pin Ax2 Bx2 Cx2 Dx1 Mounting Screws Screwdriver DB-270 I QUICK START GUIDE ITEM NO.
2.
3. MOUNTING To mount your doorbell to a wall, follow the steps below. General Installation 1. Use the wall mount attached to the rear of your doorbell, to mark the precise points on your wall to drill holes. 2. Drill holes into your wall at the marked points, then insert the included mounting anchors into holes. or 3. Use the included screws to attach the wall mount to the wall, making sure the screws go through the mounting anchors.
4. MECHANICAL CHIME KIT Both a mechanical chime kit and wireless chime are included with your doorbell. The mechanical chime kit can be connected to your home’s existing doorbell chime. The wireless chime can be used independently. For more information on setting up your wireless chime, view the “Wireless Chime” section of this guide. Before setting up your doorbell’s chime kit, first turn off the power breaker at your fuse box for your existing doorbell and mechanical chime.
5. MECHANICAL CHIME KIT Slightly unscrew both of the mechanical chime’s screw terminals. Locate the Chime Kit included in the smart doorbell's packaging, and the terminals on the inside of the chime. Connect one of the Chime Kit's prongs to the transformer terminal(usually labeled TRANS, T, AC, or 0).Connect the other prong to the chime's front terminal (usually labeled FRONT, F, 1, or C1).Either prong on the Chime Kit can be connected to either of the terminals on the chime.
6. MECHANICAL CHIME KIT Using double sided tape, affix the Chime Kit to your chime wherever there is space and replace the cover. Be careful not to interfere with any of the chime's moving parts. Ensure that the Chime Kit and wires DO NOT interfere with the mechanical parts of the chime. Mount on the outside of the chime if there is not enough room to mount inside. Then replace your chime's cover.
7. APP INSTALLATION In order to use your plug, you will first need to download the Vivitar Smart Security 2 App, which is available on the Google Play Store and on the iPhone App Store.
8. APP REGISTRATION To successfully use the Vivitar Smart Security 2 App, you will first need to create an account. To do so, follow the steps below. Open the Vivitar Smart Security 2 App and press “Register.” Enter your e-mail address or phone number to create an account. Setup a password for your account. Once finished, you can login to your account. Agree to the terms of the privacy policy. You will receive a verification code over email or text message. Enter it here.
9. DOORBELL SETUP Micro SD Card Slot 1. For best results, insert a 8-32GB Micro SD card (not included) into the Micro SD memory card slot. LED Light Ring (flashing) = Ready for Wi-Fi Connection 2. Once your doorbell is installed and powered on, the LED Light Ring will illuminate and then start to flash to indicate that your doorbell is ready for Wi-Fi Connection.
10. Wi-Fi CONNECTION Wi-Fi MyNetwork2.4g Go to your phone’s settings menu, and make sure that your phone is connected to a 2.4GHz Wi-Fi network. Open your Vivitar Smart Security 2 app. Choose to add a device, and In the Add Device screen, select to add a Smart Camera. MyNetwork2.4g PASSWORD Confirm that the LED light ring on your doorbell is still blinking. NOTE: Press “other mode” for additional setup methods. Your App offers QR Code, AP Mode and Smart Configure setup options.
11. Wi-Fi CONNECTION Your app will display a QR code. Once displayed on the screen, hold your phone directly in front of your doorbell’s camera lens. Your doorbell should emit a beep to indicate that it is ready to connect to your network. Wait as the Wi-Fi connection is established. Once the connection is established, you can use the App to control your doorbell.
12. USING THE APP On your APP’s main screen you will see the connection status of your camera. Press the camera icon to view video. Press the Me icon to access settings and additional help with using your app. View who’s at the door at any time. NOTE: Keep notifications set to ON in order to receive alerts when someone rings the doorbell.
13. USING THE APP Doorbell setting options Wi-Fi signal strength indicator Time/Date Stamp Video Resolution Maximize Video Size (Full Screen) Mute Press to record video on your phone. Press to save screenshot photo on your phone. Video Playback Press to access your phone’s microphone.
10. 14. W AI R W RE RA LE NS TY S C CA HRI M DE USB Plug Bottom View 1. Plug the wireless chime’s USB plug into an available USB power adapter. Reset Button Bottom View 2. Press the reset button to prepare your wireless chime to be synchronized with your phone. LED Indicator Light Top View 3. The LED Indicator light on your wireless chime will turn blue and flash when it is ready to be synchronized with your phone.
15. WIRELESS CHIME Press the doorbell settings option in your app. Press the bell setting menu option. In the bell settings menu you can choose the type of chime you want to access: Wireless Chime, Mechanical Chime or none.
16. WIRELESS CHIME After choosing the type of chime you are using, go back to the doorbell setting menu. Press the ring setting menu option. Make sure the LED light on your wireless chime is still blinking. Then press “Add” to synchronize your wireless chime with your phone. In the ring setting menu you can choose the ringtone sound emitted by your wireless chime and the volume of your wireless chime.
17. FCC STATEMENT Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
10. 18. W AARRRR W AA NN TY TY C ACRADR D This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
