User manual

A VCR, a laser disc player, DVD player, or any other compatible video image
source can connect to the projector.
Turn off the projector and video source before making any connections or
disconnections.
The projector can receive composite video, S-Video, or component video.
If the video source uses a RCA connector, you will need the RCA cable to
connect to the projector. Connect the yellow RCA plug on one end of RCA
cable to the projector's video jack, and connect the other end of the
yellow RCA plug to your video source.
If the video source uses S-Video connector, connect one end of the S-
Video cable into the S-Video connector of the projector, the other end to
the S-Video-out jack of your video source.
Insert three ends of a BNC cable into the projector's B/B-Y, G-Y, R/R-Y
jacks. Insert the other ends of the cable into the
jacks on your component video source. (Don't insert any of the cable
ends into the H-Sync and V-Sync jacks.)
Connect the RCA audio cable to the Audio jacks of the projector: insert
the white plug into L and the red plug into R jack. Connect the other end
of RCA audio cable to your video source.
Connecting a Composite Video Source:
Connecting a S-Video source:
Connecting a Component Source:
!
!
!
!
B/B-Y, G-Y, and R/R-Y
Connecting an Audio Source:
2.4.2 Connecting to
a Video/ Laser
Disk/ DVD
Player
Installation & Setup
8