Read dll safety instructions thoroughly prior to using this product. Prior to Use * Carefully remove packaging. * Toke care not to damage the bed frame or any included parts. ยป Carefully read and follow the product overdrew and assembly Instructions Included with the product. Electrical Considerations * This product Is for use on a standard 120-volt clutter. * Ways use a grounded. electrical surge protection device with this product.
Weight Restrictions The weight restrictions are as follows (all weights Include the weight of the mattress and bedding): Single person: 350 lbs. This product will support the recommended weight limits when weight ks distributed evenly across the base. This product ks not designed to support or lift this amount in the head section alone. Consumers should not enter or ext the bed when any portion the raised potion. Do not st on the head section while In the raised potion.
2. Install the power cord by connecting the cord jack to the receptacle on the bottom of the bed frame. Be sure the cord Is connected completely and securely 3. Insert the USB power connection port Into the bed frame controller. 4 Turn the bed over so kis standing on the six legs, then install the USB onto the side of the bed using 2 short screws (H).
5. insert retainer bar ends into the base at the foot of the bed by Inserting one end Into the left or right opening. Pinch the free end toward the inserted end and Insert the free end into the remaining opening. This will require a lite force. 6. Install the armrests onto each side of the bed using 2 long screws (G) on each side. 7. Puttee side bag over the armrest where It will be most conveniently located. 8. Plug the power cord into the wall outset and run the test.
Read all Warnings and Precautions in this manual before attempting to use the bed. Adjust the positioning of the bed by using the wireless remote. The button functions on the remote are as follows: LA Head Up: Ramses the head position up. A 2 Head Down: Lowers the head potion, A Foot Up: Raises the foot position up. = Foot Down: Lowers the foot position. FLAT Reset: Re tums the bed to the lay flit potion. 6 2G: Zero Gravity Position. am E Lighting: Lights up bunions on remote.