Instructions

Vive Integral Fixture Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive Wireless
3691039n 3 06.14.22
Specifications (continued)
Vive Integral Fixture Controls (continued)
DFCSJ-OEM-OCC Features (these do not apply to
DFCSJ-OEM-RF)
Occupancy / Vacancy Functionality:
• Passive infrared motion detection with exclusive Lutron
XCT Technology for major and minor motion detection.
• 360˚ field-of-view.
• 144 ft
2
(43.9 m
2
) major motion and minor motion coverage
based on 9 ft (2.75 m) ceiling height. See page 7 for more
details.
Daylight Sensor Functionality:
• Daylight sensor has simple, automatic calibration
out-of-the-box.
• Designed to give a linear response to changes in
light level.
• Detects ambient light level changes from 0 to 1600 lx
(0 to 150 fc).
• Daylight compensation through Lutron reliable closed
loop proportional control. For more information, see
www.lutron.com/TechnicalDocumentLibrary/daylighting_
white-paper.pdf
DFCSJ-OEM-OCC/RF Features
• Power failure memory
• 2-wire connection between a Vive integral fixture control,
an EcoSystem driver, and a fixture control digital link
interface
– The wires are non-polarized to prevent mis-wires
between the DALI terminals
• Measured power available when connected to a driver
that has that capability (such as Advance XitaniumR SR
or OSRAMR DEXALT). Accuracy is defined by the driver
specification.
• Measured power uses power reported from the driver.
Theoretical power requires the user to specify a max
power value in the Vive app / UI, and calculates power
based on the current load level.
Fixture Level Settings
(adjustable via the Vive hub user interface)
• Low-end trim adjustment (default is minimum level
for Lutron EcoSystem drivers). Also adjustable using
Pico wireless control. See App Note #556 (048556)
at www.lutron.com
• High-end trim adjustment (default is 100% for
Lutron EcoSystem drivers). Also adjustable using
Pico wireless control. See App Note #556 (048556)
at www.lutron.com
• Minimum Light Level Setting (optional). Certain
applications, such as hallways, may require that
the lights never turn off. For these areas, select
the minimum light level option and the load will
lower to programed low-end level.
• Favorite light level can be set using a Pico remote
control.
3