Instructions

ManualsBrandsVive ManualsFixture Controlsvive 3691039n Integral Fixture Controls

Vive Integral Fixture Controls

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive Wireless

3691039n 1 06.14.22

Vive Integral Fixture Controls

This device is designed to operate as part of a Vive lighting

control system. If used in a standalone (non-system)

application, functionality is limited to default settings.

The Vive integral ﬁxture control is a radio frequency (RF)

device that controls either Lutron EcoSystem or DALI

drivers based on RF input from Pico remote controls, Radio

Powr Savr wireless sensors, or Vive hubs. It is intended to

be mounted to a ﬁxture at the ﬁxture manufacturer’s facility.

Models Available

Model Number Description

DFCSJ-OEM-OCC Vive Integral Fixture Control with Sensor

DFCSJ-OEM-RF Vive Integral Fixture Control (RF only)

DFC-OEM-DBI Fixture Control Digital Link Interface

• DFCSJ-OEM-OCC:

– Measures light in the space (daylighting) while detecting

people moving within an area using passive infrared to

determine occupancy.

– Controls the lights to balance the light level in the space,

combining convenience, exceptional energy savings, and

ease of installation.

– Contains two wires which connect to either a driver with

integrated self-powered DALI link or to the ﬁxture control

digital link interface.

– For default settings, see page 2.

• DFCSJ-OEM-RF

– Provides wireless control of the ﬁxture when neither

occupancy nor daylight sensing is needed.

– Contains two wires which connect to either a driver with

integrated self-powered DALI link or to the ﬁxture control

digital link interface.

• DFC-OEM-DBI

– Provides power to the Vive integral ﬁxture control and

communication links when used with Lutron EcoSystem

drivers.

Communication with RF input devices is accomplished

using Lutron Clear Connect RF Technology. See

Applications and Selecting the Right Control on

page 12 for more details on selecting the appropriate

device.

Vive Integral Fixture Control (scale 1:1)

(DFCSJ-OEM-OCC shown)

See page 9 & 10 for system diagram

See page 5 for actual dimensions

These products are also compatible with the Vive hub

(software version 1.5 and above) which enables a simple

setup process using a standard web browser on any

Wi-Fi enabled phone, tablet or computer. It also enables

control and monitoring of all Vive devices. The Vive hub

can be added at any time. System reprogramming will be

required. For a complete list of features supported with

the Vive hub, see speciﬁcation submittal 369902 at

www.lutron.com

Summary of content (13 pages)

PAGE 1
Vive Vive Integral Fixture Controls Wireless 3691039n 1 06.14.22 Vive Integral Fixture Controls This device is designed to operate as part of a Vive lighting control system. If used in a standalone (non-system) application, functionality is limited to default settings. The Vive integral fixture control is a radio frequency (RF) device that controls either Lutron EcoSystem or DALI drivers based on RF input from Pico remote controls, Radio Powr Savr wireless sensors, or Vive hubs.
PAGE 2
Vive Vive Integral Fixture Controls Wireless 3691039n 2 06.14.22 Specifications Vive Integral Fixture Controls Regulatory Approvals • cULus Listed (UL244A - listing E174075) • Complies with requirements for use in other spaces used for environmental air (plenums) per NECR 2014 300.22(C)(3) • FCC compliant with the limits for a Class B digital device • IC (Industry Canada) • Controls DALI-compliant loads Power / Load • IEC SELV / NECR Class 2 • Operating voltage: 9.5–20.
PAGE 3
Vive Vive Integral Fixture Controls Wireless 3691039n 3 06.14.22 Specifications (continued) Vive Integral Fixture Controls (continued) DFCSJ-OEM-OCC Features (these do not apply to DFCSJ-OEM-RF) Occupancy / Vacancy Functionality: • Passive infrared motion detection with exclusive Lutron XCT Technology for major and minor motion detection. • 360˚ field-of-view. • 144 ft2 (43.9 m2) major motion and minor motion coverage based on 9 ft (2.75 m) ceiling height. See page 7 for more details.
PAGE 4
Vive Vive Integral Fixture Controls Wireless 3691039n 4 06.14.22 Specifications (continued) Compatible Drivers** (see Application Note #642 (048642) at www.lutron.com for wiring diagrams) Model Number Description Type of Power Reporting Maximum Number of Drivers* Notes/Limitations OTi85 / 120-277/2A3 DX L OTi50 / 120-277/1A4 DX L OTi30 / 120-277/1A0 DX L OSRAMR DEXALT Measured 2 – More than 2 drivers requires the re-configuration of additional drivers to de-activate DALI power supply.
PAGE 5
Vive Vive Integral Fixture Controls Wireless 3691039n 5 06.14.
PAGE 6
Vive Vive Integral Fixture Controls Wireless 3691039n 6 06.14.22 Dimensions Measurements shown as: in (mm) DFCSJ-OEM-OCC DFCSJ-OEM-RF 1.348 (34.24) 1.348 (34.24) .365 (9.27) .365 (9.27) .482 (12.24) .995 (25.27) .995 (25.27) 2.645 (67.18) .482 (12.24) 2.645 (67.18) .365 (9.27) .365 (9.27) Minimum Depth Required in Fixture (as measured from front face of fixture) Minimum Depth Required in Fixture (as measured from front face of fixture) 1.120 (28.44) 1.120 (28.
PAGE 7
Vive Vive Integral Fixture Controls Wireless 3691039n 7 06.14.22 Dimensions Measurements shown as: in (mm) Knockout Dimensions 2X R .408 (10.36) .816 ± .005 (20.72 ± 0.127) 2.481 ± .005 (63.02 ± 0.127) DFC-OEM-DBI 1.17 (29.7) 4.60 116.9 5.06 (128.5) .81 (20.5) 5.06 (128.5) Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: .81 (20.
PAGE 8
Vive Vive Integral Fixture Controls Wireless 3691039n 8 06.14.22 Range Diagrams Ceiling 9 ft (2.7 m) Floor 15 ft (4.6 m) 9 ft (2.7 m) 3 ft (0.9 m) 0 3 ft (0.9 m) 9 ft (2.7 m) 15 ft (4.6 m) Major motion: Movement of a person entering or passing through an area. – 12 ft x 12 ft (144 ft2) (3.65 m x 3.65 m [13.3 m2]) 1,2 1 2 12.0 ft (3.65 m) Note that this is for the high sensitivity setting. Lights may turn on outside the major motion area.
PAGE 9
Vive Vive Integral Fixture Controls Wireless 3691039n 9 06.14.22 Range Diagrams Vive Integral Fixture Control Fixture Control 30 ft (9 m) Maximum Pico Remote Control NOTE: Wireless sensors and controls must be located within 60 ft (18 m) line of sight of each other, or 30 ft (9 m) through walls.
PAGE 10
Vive Vive Integral Fixture Controls Wireless 3691039n 10 06.14.22 Meeting RF Performance Criteria Background LED drivers are electrically very noisy, and this noise gets coupled onto the LEDs, LED load wires, driver power wires, and control wires, which can cause issues for RF controls. All RF controls are sensitive to this type of interference which can be generated by a driver, cell phone, or Wi-Fi router.
PAGE 11
Vive Vive Integral Fixture Controls Wireless 3691039n 11 06.14.
PAGE 12
Vive Vive Integral Fixture Controls Wireless 3691039n 12 06.14.22 Wiring / System Diagram: DALI Driver with Integrated Self-Powered DALI Link Maximum number of wireless devices that can be associated to one Vive integral fixture control: Pico Remote Control (up to 10) Radio Powr Savr occupancy sensor (up to 10) Radio Powr Savr daylight sensor (1 maximum) Vive Wireless Hub (1 maximum) Link Test Dashed line = Fixture The blue wires on Vive Integral Fixture Control are polarity-free (wires A and B).
PAGE 13
Vive Vive Integral Fixture Controls Wireless 3691039n 13 06.14.