User Guide
Table Of Contents
- Unboxing
- Headset
- About the VIVE 2018 headset
- Putting on the VIVE 2018 headset
- Can I wear my prescription glasses while using VIVE 2018?
- Adjusting the IPD on the headset
- Flipping up the visor
- Removing the face cushions
- Replacing the front cover
- Connecting a USB device to VIVE 2018
- Reattaching the front and back pads to the headset
- Removing the front and back pads
- Plugging in the earphones
- Attaching the on-ear headphones to the headset band
- Detaching the on-ear headphones from the headset band
- Attaching the cable guides to the headset band
- Detaching the cable guides from the headset band
- Attaching the top strap to the headset band
- Detaching the top strap from the headset band
- Updating the headset firmware
- What does the status light on the headset mean?
- Cleaning the headset lenses
- Cleaning the face cushions
- Link box
- Controllers
- Trademarks and copyrights
- Index
5. Insert the headset cable connector (side with triangle mark up) to the port on the link box
with the corresponding triangle mark.
6. Press the Power button to turn the link box on.
Restarting the link box
If you need to restart the link box, follow these steps.
1. Close all Steam apps on your computer, including the SteamVR app.
2. Press the Power button to turn the link box off, and then press the Power button again to
turn it back on. On your computer, you might see a notification that drivers are being
installed. Wait for the installation to finish.
3. To verify that VIVE
™
hardware is detected, restart SteamVR on your computer.
37 Link box
Confidential
For certification only
Confidential