User Guide
Table Of Contents
- Unboxing
- Headset
- About the VIVE 2018 headset
- Putting on the VIVE 2018 headset
- Can I wear my prescription glasses while using VIVE 2018?
- Adjusting the IPD on the headset
- Flipping up the visor
- Removing the face cushions
- Replacing the front cover
- Connecting a USB device to VIVE 2018
- Reattaching the front and back pads to the headset
- Removing the front and back pads
- Plugging in the earphones
- Attaching the on-ear headphones to the headset band
- Detaching the on-ear headphones from the headset band
- Attaching the cable guides to the headset band
- Detaching the cable guides from the headset band
- Attaching the top strap to the headset band
- Detaching the top strap from the headset band
- Updating the headset firmware
- What does the status light on the headset mean?
- Cleaning the headset lenses
- Cleaning the face cushions
- Converter
- Controllers
- Trademarks and copyrights
- Index
Attaching the lanyards to the controllers
Using the lanyards may help prevent the controllers from accidentally being dropped; however,
please do not fling or violently throw the controller as the lanyard may break.
1. Gently push down on the top of the battery cover, then slide and lift to remove it.
2. Insert the lanyard loop on the corresponding hole at the bottom of the controller. Make
sure that the loop is hooked around the post.
3. After replacing the battery cover, slide the lanyard over your wrist, and then slide the lock
to tighten the lanyard comfortably around your wrist.
Turning the controllers on or off
§ To turn the controller on, briefly press the System/Menu button.
§ To turn the controller off, press and hold the System/Menu button for around 3 seconds.
Pairing the controllers with the headset
1. From your computer's Windows system tray, click VIVE 2018 Settings.
2. Select Control Unit and Pair Controller in Left controller or Right controller.
3. Turn on one of the controllers by briefly pressing the System/Menu button.
4. To initiate the pairing process, press the System/Menu and B/Y buttons at the same time.
When the pairing is successful, the blinking light turns solid.
5. Pair the other controller by repeating steps 2 to 4.
41 Controllers
Confidential
For certification only
Confidential