User Guide
Table Of Contents
- Unboxing
- Headset
- About the VIVE 2018 headset
- Putting on the VIVE 2018 headset
- Can I wear my prescription glasses while using VIVE 2018?
- Adjusting the IPD on the headset
- Flipping up the visor
- Removing the face cushions
- Replacing the front cover
- Connecting a USB device to VIVE 2018
- Reattaching the front and back pads to the headset
- Removing the front and back pads
- Plugging in the earphones
- Attaching the on-ear headphones to the headset band
- Detaching the on-ear headphones from the headset band
- Attaching the cable guides to the headset band
- Detaching the cable guides from the headset band
- Attaching the top strap to the headset band
- Detaching the top strap from the headset band
- Updating the headset firmware
- What does the status light on the headset mean?
- Cleaning the headset lenses
- Cleaning the face cushions
- Converter
- Controllers
- Trademarks and copyrights
- Index
Attaching the headphone audio cable
After the left and right on-ear headphones have been attached, attach the headphone audio
cable to the headset band.
1. Remove the front pad from the headset band. For details, see Removing the front and back
pads on page 18.
2. On the front section of the band, press the audio cable marker into the slot at the center.
Then press the cable along the groove until flush with the band.
3. Reattach the front pad and side cushions to the headset band. Make sure that the side
cushions cover the metal clasps on the band.
25 Headset
Confidential
For certification only
Confidential