Instruction Manual

VIVAX ENG
24
Remote Control Operation Range
Point the remote control at the TV
within no more than 5 metres from the
remote control sensor on the TV and
within 60° in front of the TV.
The operating distance may vary
depending on the brightness of the
room.






USING THE REMOTE CONTROL
• Turning your TV on and off
Turning off to standby mode: Press [ ] button on the back/bottom of TV or
press on the remote control to switch to standby mode. You can activate
the unit again by pressing [ ] or
 button.
Power indicator: Light indicates standby mode. There will be no light when
the power switch is in the off position.
►NOTE
Remove the connection from the wall power outlet if you do not intend to use the unit
for long periods, for example if you plan to be away a few days. Wait at least 5 seconds
after turning off if you want to re-start the TV.
• Selecting the Input Source
Select the Input Source depending on the video device you have connected
to your TV.
To select the Input Source: Press [HOME ] button, than in HOME menu
choose SOURCE icon , when the list of Input Source appears, press [
/ ] to select the source [AV], then press [OK] to connect.
• Adjusting the volume
Press [VOL+/VOL- ] to increase or decrease the volume.
Press [ Mute ] to turn the sound off. Press [ Mute ] again to turn the sound
back on.