User's Handbook

™
Page 19 of 66
2 vLoc3 RTK-Pro Receiver
2.10.6 Omni Peak Response Mode
The two double-ended arrows around an icon mean that the line is detectable regardless of locator
blade orientation.
It is very useful for quickly checking an area for buried lines using a grid search as one sweep will
catch all locatable lines. In the classic screen, the Omni feature is available in the “Peak” and “Broad
peak” modes.
2.10.7 Information Pushbutton (Depth and Current)
4G
Log
27
0.72m 43.0mA
50°42′59.90570′′N
3°26′35.54358′′W
43.0mA
27.50m
Pushbutton
0′1′′ (2DRMS)
When in a Locate screen, a quick press of the “i” (information) pushbutton will display the depth and signal current.
The display shown above shows Longitude/Latitude positional information. To the top right is the height above sea level. This
is only displayed when the equipment is paired with a valid GPS and a valid signal is received. Also, note that the 2DRMS is
shown; this is the expected GNSS/RTK accuracy.
4G
Log
29
50°42′59.90570′′N
3°26′35.54358′′W
63.3mA
27.50m
0′1′′ (2DRMS)
If a valid GNSS/RTK x is available, an additional screen will be shown with a spirit level. The function of this is described in the
“Datalogging” section.
It is also possible to save the data to the internal memory. This is explained in detail in the “Datalogging” section.
IMPORTANT
When locating a cable or pipe (“Line”) – depth and current measurements should only be taken with
the bottom of the receiver standing on the ground and directly in line with the target line. Unless the
Omni direction mode is selected in which case orientation is not important.