User`s guide

23414 WLAN ROUT 54-N
Time Zone Setting
This page allows users to configure the time of the router. To specify manually, fill in the
blanks in “Current Time” and click the “Apply Change” button. To synchronize time from a
timeserver, please mark the “Enable NTP client update” checkbox, select a NTP server
from the drop list or manually enter a NTP server. Click the “Apply Change” button after
your configuration.
mLogSyste
This System Log page shows the information of the current activities on the router.
heckbox.
2. To see all information of the system, select the “system all” checkbox.
To see wireless information only, select the “wireless” checkbox.
To sent the log information to a certain note, select the “Enable Remote Log” checkbox
and fill in the IP address in the “Log Server IP Address” box.
3. Click the “Apply Changes” button to activate
You could also click the “Refresh” button to refresh the log information or click the “clear”
button to clean the log table.
To enable system log function:
1. Mark the “Enable Log” c
39