Specifications

Wireless LAN 54 Mbps
78
PC Performance
This integrated router forms the centrepiece of a wired / wireless network.
It combines Internet Gateway and Wireless LAN Access Point with a 4 port 10/100 Ethernet switch.
It has been conceived for home and office use and facilitates joint use of an internet connection,
data memories or printers in a flexible network.
This product does not just provide several different features but makes initialisation and
configuration possible in minutes.
The network and joint use of the internet can generate real savings.
ADSL/
Cable Modem
Lan Disk
Printer
PC PC
Internet
Notebook
AV-Receiver
PC
Game Console
WLAN ANT ctn qty. 5 EDP-No. 26261
WLAN aerial with magnetic foot, 5 dB gain to extend the operation range
External aerial to improve the reach of an existing WLAN network.
Can be connected to routers, WLAN cards and Access Points with R-SMA connector.
- Height: 21.2 cm
- Comes with 1.5 m connection cable with R-SMA connector
- Swivels by 90°
- Large magnetic foot ensures stability. Magnet lets you fasten the aerial, for example, to the radiator
- Frequency range: 2400 – 2,500 MHz
- Impedance: 50 Ohms nominal
- VSWR: 1 : 1.5
- Gain: 5 dBi
- Polarisation vertical
- Verpackung: blister
System requirements: - WLAN adapter or router with screwed aerial
- WLAN adapter or router with R-SMA connector
Why gigabit networks?
For Ethernet networks, i.e. networks which are connected by twisted pair
cables, two different speed levels are defined, 10 Mbps* technology hardly
figures anymore. 100 Mbps* technology is already widespread and sufficient
for most applications.
If extremely fast connections are required, 1000 Mbps* or gigabit Ethernet
technology can be used. It is important to note that all components, i.e.
network cards, switches, routers and cables, have to be gigabit compatible.
Cables must correspond to at least CAT 5e.
*Mbps = Mega Bits per second
Network Interface
06 PC Perf-2 09 uk:06 PC Perform_2_06 11.08.2009 19:19 Uhr Seite 78