Specifications

Computer Connections
PC internal
CC S 05 I 0.5 m ctn qty. 5 EDP-No. 45460
CC S 09 I 0.9 m ctn qty. 5 EDP-No. 45461
Serial ATA connection cable
7 pin ATA plug <-> 7 pin ATA plug
- Data rate 166 Mbit/s
- Fully ATA serial compatible
- Serial ATA allows “hot plugging” of a hard drive during operation
- Thin cable against heat accumulation, for better system stability
CC I 12 I 1.2 m ctn qty. 5 EDP-No. 45462
E IDE hard disk cable
40 pin socket <-> 2 x 4
0 pin socket
- E IDE bus cable for up to 2 drives to an AT bus interface
CC I 02 P 0.2 m ctn qty. 5 EDP-No. 45463
Power connection
5.25" plug <-> 2 x 5.25" socket
- Power distribution to 2 devices
CC S 09 E 0.9 m ctn qty. 5 EDP-No. 45457
External serial ATA II connection cable
7-pin eSATA plug <-> 7-pin eSATA plug
- For connecting external hard drives or mass storage devices to eSATA Interface
- Data rate of up t
o 300 Mbyte/s
- Fully compatible with ATA serial I
- Serial ATA II makes it possible to "hot plug" a hard drive during operation
CC S 05 S ctn qty. 5 EDP-No. 45458
e SATA slot
Slot card with 2 external S-ATA ports
- This slot card is used to make use of existing S-ATA interfaces on the mainboard or controller from
outside for external S-ATA devices.
- 2 external SATA connection ports
- Each with 30 cm SATA c
able with L-type plug
82
07 PC Kabel_UK 10_12_A_Kabel-Computer_06 19.08.10 12:20 Seite 82