Installation guide

71
PC Performance
www.vivanco.com
PC Performance
Interface & IO IDE & S-ATA
PCI SATA 4R-N ctn qty. 5 EDP-No. 23410
PCI -> 2x S-ATA RAID controller
This High-Speed PCI controller Card provides two S-ATA RAID Interfaces.
- Compatible with Serial ATA specification version 1.0 and PCI specification version 2.0
- Joint operation with Ultra ATA controller and connection of up to 2 SATA devices possible
- Up to 2 devices can be optionally connected to 2 external and 2 internal ports
- Supports the 32 bit wide PCI bus with 66 MHz and
- Data transfer rates up to 150 MB/sec (1.5 Gb/s)
- Dual independent DMA channels with 256 KB FIFO / channel
- Software RAID 0 (striped) and RAID 1 (mirrored) support.
- GUI system monitoring
- RAID Set information display/logging/warning
- Administration of RAID Set functions (configuration, restore, etc.)
- 2 SATA data cables and 2 SATA power cables included
- Package: blister
System requirements:
- Computer with PCI slot rev. 2.2 or kompatibel
- Microsoft
®
Windows
®
98SE, 2000, ME, NT, XP or Vista
E-SATA SLOT ctn qty. 5 EDP-No. 21552
Slot bracket with 2 external S-ATA ports
This slot bracket is used to make S-ATA interfaces on the main board or on controller
cards available to external S-ATA II / S-ATA I devices.
- 2 external S-ATA II input jacks
- Data transfer rates up to 300 MB/s
- Compatible with SATA I 150 MB/s
- 2x 50 cm S-ATA cable with L-type connectors
- Package: blister
System requirements:
- Computer with S-ATA interfaces on the main board or on controller cards
- A free space for slot brackets