Specifications

81
www.vivanco.com
POWER ACCESSORIES
Smoke/CO detector & accessories
SD 5Y
EDP-No. 33508
ctn qty. 10 / white
Smoke Detector, VdS certified
- VdS approved and certified
- Tested according to smoke detector standard EN14604
- CE certified
- Incl. 9V ALKALINE Long Life battery
- Battery lifetime: 5 years
- With function LED and audible signal
- With self test function
- Automatic function control
- With alarm function when the battery power isn´t high enough
- Easy and wireless installat
ion
- I
ncl. instruction manual
SD 2 SET
EDP-No. 31781
ctn qty. 1 / white
Photoelektrischer Rauchmelder, 4er Set
- Tested according to smoke detector standard EN14604
- Incl. 9V battery - lifetime: 1 year
- Optische Funktionsanzeige und akustisches Signal (85 db)
- With self test function
- Automatic function control
- With alarm function when the battery power isn´t high enough
- Incl. instruction manual
MH SD1
EDP-No. 34426
ctn qty. 25
Magnetic holder for smoke detector
‐ Quick and clean assembling
‐ Fits for almost all smoke detectors (ᴓ >8cm)
‐ Also suitable for CO alarm, heat alarm and other, similar devices
‐ 3M glue tape for a save and permanent assembling
‐ Incl. instruction manual
CO M1
EDP-No. 34425
ctn qty. 10 / white
Carbon Monoxide (CO) Alarm
The installation of the CO Alarm is recommneded by chimney sweeper. Potential
couse of risc are chimney, gas stove, gas heating system.
- Oil-, wood burning- and cockle stove
- To protect against toxic carbon monoxide
- With function LED and 85dB alarm
- Visuell Alarm (red flashing LED)
- Low battery alarm
- Regularly self test function
- Continuo
us measure
ment of carbon monoxide concentration in the air
- Content: CO-Alarm, mounting material, manual, 9V battery
- Dimensions: 107mm ᴓ, Height 44mm
- Battery Type: 9V Alkaline
- Certification: CE / EN50291
- Operation temperature: +5 to +40°C
- Alarm level: >85dB
- Sensibility of the CO Sensor:
- 50 ppm within 60 - 90 min
- 100 ppm within 10 - 40 min
- 300 ppm within 3 min