User guide

12
6.2 Using the favourite channel button
1. If you want to call up the favourite channels you have
previously programmed, simply press and release the FAV.
CH key repeatedly to scroll between the channels you have
stored.
2. If there is no favourite channel stored under the FAV.CH key,
 WKH/('ZLOOÀDVKUDSLGO\WLPHVWRLQGLFDWHDQHUURU
7. Troubleshooting
The remote control will not switch on:
Check that the batteries are new and installed correctly,
observing the correct polarity.
The remote control range is poor:
1.Check that there are no obstacles between the remote
 FRQWURODQGWKHHTXLSPHQWWKDWPD\EORFNRUGHÀHFWWKH
infra-red signal.
2.Replace the batteries.
My brand is not listed in the code list:
1.It is possible that your brand of television uses a similar
code to other brands. Use the Auto Code Search facility to
scan through all codes listed in the remote control database.
2.If you have your original remote control, use the Learning
Mode to transfer any or all button functions from your
original remote control to the new remote control.
3.If you are programming the remote for a brand/model that is
not listed in the Popular Brand List or the Direct Code Entry
(e.g. Wharfedale, Acoustic Solutions etc), it is recommended
that you use the Auto Code Search method (go to section 3)
or the Learning Mode (go to section 4).
What do I do if I need to add additional functions/Not all
functions on the remote will work :
This remote control features the majority of functions of
original remote controls, so there may be cases where some
additional button functions may not operate. In this situation
use the Learning Mode (see section 4) to assign the missing
functions to the required keys.
7.1 Further help
For further help, please contact our technical helpline on
Philex Customer Careline: 08457 573 479
(Local rate - UK only)
Or email us at:
[e-mail]
N.B. Finding your device and code
Device codes need to be stored on the correct device key, below is a
list showing the device types corresponding to each device key.
Please note that DVRs or DVD Recorders may be in the DVD list or the
DVR list. For combo equipment the codes may need to be stored on
more than one device key to give full control.