Datasheet

53
SAT
www.vivanco.com
SAT
Do it yourself
STD BKS-N 1 piece ctn qty. 5 EDP-No. 44015
F short adaptor
F socket <-> coax plug
- To adapt a connection with coax socket to an F plug
STD BKB-N 1 piece ctn qty. 5 EDP-No. 44016
F short adaptor
F socket <-> coax socket
- To adapt a connection with coax plug to an F plug
Splitter
STS DSW2-N 1 piece ctn qty. 5 EDP-No. 44150
DISEqC switch 2/1 with weather protection housing
2x F socket --> F socket
- Frequency range: 950 – 2500 MHz
- Supports DISEqC 1.0 – 2.0
- Suitable for tone burst (22kHz)
- For switching the LNB when receiving two satellites in single or multi-switch equipment
- Note: receiver must be DISEqC or tone burst suitable
STS DSW4-N 1 piece ctn qty. 5 EDP-No. 44151
DISEqC switch 4/1 with weather protection housing
4x F socket --> F socket
- Frequency range: 950 – 2500 MHz
- Supports DISEqC 1.0 – 2.0
- Suitable for tone burst (22 kHz)
- For switching up to 4 LNBs when receiving at least 4 satellites in single or multi-switch equipment
- Note: receiver must be DISEqC or tone burst suitable
STS EW-N 1 piece ctn qty. 5 EDP-No. 44152
SAT Input adaptor
2x F socket -> F socket
- For the connection of SAT and terrestrial aerial signals using a single cable
- Frequency range: 5 - 862 / 950 - 2400 MHz
STD FT-N 2 pieces ctn qty. 5 EDP-No. 44012
F load resistor 75 ohm
F socket -> load resistor
- For reflection free capping of all unused F sockets