Users Manual

5
CHAPTER 2: SETTING UP YOUR SYSTEM
Before you first time using your meter or if you change your meter battery, you
should check and update your meter settings.
Set the Date and Time
1. Enter the Setting Mode and Set the Date
When the meter is off, press and hold
until the meter beeps to enter the set up
mode with the number in the year position
will now flash on the display. Press to
adjust it then press and hold until the
meter beeps to set. Then it will shift to next
digit for setting. Repeat the above action until the year setting is
completed.
The month will now flash. Press to adjust the month, press
and hold until the meter beeps to set.
The date will now flash. Press to adjust
the date, press and hold until the meter
beeps to set. Then it will shift to next digit
for setting. Repeat the above action until
the year setting is completed.
Note:
Before you first time use your meter system for testing, please adjust the meter
settings to set the correct date and time, ensuring that results stored in the memory
are shown with the correct date and time.