User guide

3. Select the network connection that the SSID is the same as that of the device, and then click .
Note: - If the encryption parameter is set for the device, the Wireless Network Connection dialog box is displayed and
requires the network key and conrmation.
- The SSID and key label is attached on the device.
Wait for a while. The wireless connection icon displays in the status area in the lower right corner of the screen. Then,
your PC can automatically connect to the device.
Step 2. Access the Internet
By default, the device automatically dials up to access the Internet. You can directly use the
Internet service. If the Internet service does not respond, you can access the Internet using
the dialing button manually. Press and hold until is blinking, the connection is set up
successfully. Then you can use the Internet service.
Note: Press and hold until is off, the connection is torn down.