User guide
Micro SD Card
If the WiFi Clients connected with the device support the WPS, the device can automatically generate a network key
without manually entering. The operation steps of WPS-PBC (Push Button Conguration) are as follows.
1. Remove the rubber cap from the Micro SD card slot. Then insert the Micro SD card into the slot.
2. After inserting the Micro SD card completely, replace the rubber cap.
Note: - Micro SD card is an optional accessory. If the Micro SD card is not provided in the package, you can buy
one yourself.
- To remove the Micro SD card, open the rubber cap and press the Micro SD card gently. Now the Micro SD card
will pop up automatically. Then take it out.
- Do not remove the card when it is being used. Removing the card during an operation may damage the card as
well as the device, and data stored on the card may be corrupted.
Restoring to Factory Defaults
If you need to reconstruct the network or you forget the changes of some parameters, you can choose to restore factory
defaults and recongure the device.