User guide
Establishing the WPS Connection
If the WiFi Clients, connected with the device support the WPS, the device can automatically generate a network key
without manually entering. The operation steps of WPS-PBC (Push Button Conguration) are as follows.
1. Power on the device.
2. Start the Clients connected with the device.
3. Enable the WPS of the device.
Note: After the WiFi is enabled, press and hold . When becomes off rst and then fast blinking in blue, the WPS
of the device is enabled.
4. Enable the WPS of the Clients.
Note: For the WiFi operations of the Clients see the Clients’ user guide.
WiFi/WPS