Owner Manual

Detail D

Detail E

Part P3 does not

have the bottle

opener or the

Viva Sol logo.

NOTE:

Detail A

Detail C

Detail B

ASSEMBLY INSTRUCTIONS:

Detail F

1. Attach P1 to P2 with Screw Knob H1 as shown in

Figure 1 and Detail A. Screw Knob until the parts are

secure but do not over tighten. Follow the same

procedure to attach P1 to P3. See Detail F.

2. Attach yellow tube P6 and Pink Tube P4 to Vertical

Support P2 with H1 screw knob, screw all the way

but do not over tighten. See Figure 1 and Detail B

& Detail C.

3. Assemble P3 assembly to pink tube P4 and

Yellow Tube P6 with H1 Screw knobs but only

tighten the knobs half way. See Figure 2 and

Detail D.

Note: Part P3 does not have a logo or bottle opener.

4. Carefully insert green tube P5 into the holes of

both P2 and P3 and tighten remaining H1

Screw knobs until the ladder assembly is

secure but do not over tighten hardware.

5. Repeat Steps 1-4 to assemble second Ladder.

DO NOT OVER TIGHTEN THE SCREW KNOBS BECAUSE IT

MAY TORQUE THE FRAME PREVENTING IT FROM RESTING

EVENLY ON THE GROUND. IF THE LEGS ARE NOT RESTING

FIRMLY ON THE GROUND TRY LOOSENING ALL SCREW

KNOBS AND RE-TIGHTEN WITH LESS PRESSURE.

NOTE:

Figure 1

-2-

NOTE:

BECAUSE THE NATURE OF SOLID WOOD, RELATIVE HUMIDITY AND SEA-

SONAL CHANGES WILL EXPAND AND CONTRACT. IT WILL RESULT IN THE

WARP OF THE VERTICAL LADDER SUPPORT. BUT AFTER CUSTOMERS

ASSEMBLE IT WITH PROPER HARDWARE, IT WON’T AFFECT THE STABILITY

AND PLAYABILITY OF THE OVERALL DEVICE.