Product Manual

WARNING
Keep the air vents in the appliance casing and/or cabinet for built-in
installation free from obstruction.
Using the special screws, continue to t the refrigerator in the cabinet, inserting the screws
into the holes along the fastening prole (Fig. 5.1.3).
Install the refrigerator away from heat sources in dry and well-ventilated surroundings.
WARNING
After completing the installation, make sure that the appliance is not resting
on the
power cable.
PLEASE NOTE:
Leave the appliance idle for at least one hour before putting it into operation.
During
this time, it is possible to carry out the initial cleaning operations.
5.2 – TYPE OF BUILT-IN INSTALLATION
Total
A total built-in installation required the handle of the “boxed” type that is ush with the door.
Partial
Partial built-in installation, the “Door Outside” format, which is standard for the whole range,
requires the satin-nish stainless steel handle, while the door is protected against accidental
opening by the “Pin Lock” and “Pad Lock” systems.
58
EN
Fig. 5.1.3
Fig. 5.1.4