User's Manual

1. In stand-by state, press menu button to display main menu option.
2. Select calls icon (second line, second option) and then press OK.
The icons are as follow;
3. On calls screen, select Option and press OK to go to option screen.
4. Select Call costs and press OK to display the following options.
a. Last call: displays the cost of the last call, which can be expressed
in specific unit or currency through Display calling cost option
(described later)
b. All calls: displays the cost of all calls. Press Reset button to delete
the cost displayed. The terminal will ask you to input PIN 2. The
password shall be input correctly. If not, the cost of all calls will not
be deleted. If so, a message The cost of calls is set to 0(zero) will
be displayed.
c. Call Cost Limit: limits the maximum cost of calls available. Select
this option to display on or off option screen. Then, select on and
input PIN 2 correctly to display the screen to write the desired
maximum cost of calls on. In order to cancel this option, select off
and input PIN 2 correctly.
d. Call Cost Display: where display type of calling cost is specified
with two options of specific unit or currency. If you want to
change options, input PIN 2 correctly.
105